DSCN0296.JPG

Updated to tool to crom 1r13i today and now it says it doesnt support my CalId 04510055AE. What is going on? This car is my only way to work and it will not run properly with the stock tune since it has a tune for 3 bar map and tip and RC 750cc Injectors. Please help! I have to work ...

open dsdl, go to advanced tab, click add tune, select the tune, then select the matching backup.
repeat until both tunes are in the list, then click save to disk.
Take the file it creates there, and put it on the SD card then import them to the tool from SD.


Ill give it a try. Thanks. I was ...

Has anyone done a custom tune transfer from your PC directly to the SD card and then gone out to the car and put it in the trinity (btw the trinity is married to the car) and gives an error when you try to install the custom tune to the trinity via options\sdcard operation\install custom tune? These ...

Adding more fuel may not help in 89 oct fuel. Octane is basically how easy the fuel can ignite. If you dump more 89 in the cyl by increasing fuel then you may just waste fuel by not buring it all completely and possibly give knock and fuel buildup in the exhaust causing backfires or pops. 89 does ...

.......

you cannot backdate it one revision, you will have to install 1r10 mega, then install the incremental you want. 1r10g is the latest.

None of the 1r10~ croms are working for the 03 SRT-4 S1. It hault monitoring and freezes and you cannot create a PIDs layout and log with it. It will freeze and ...

typan wrote:Hi all, if I have a custom tune installed can I make a quick adjust like the 180 stat fan adjust without upsetting the custom tune?

Yes you should be able to.

No problem. So it sounds like all dodge vehicles are having problems. Im sure Diablosport will will get a fix going soon. I think the trinity tunes fine still. It has to be just the pids and logging part of the crom that is having issues.

I wonder if the ds downloader updated you to the latest crom. were you doing the update via button "Update Tool" on the DS Downloader? Maybe after the trinity reset while it was connected to the dsdownloader it downloaded the latest crom. The croms came out really close together this time on the ...

Hopefully they will get it fixed soon. Do you drive an SRT4 also?

Yes just use the data viewer and real time log. It should let you select all the PIDs you want. Plug in the trinity first to the car then when it boots up open the data viewer on the computer and then connect the usb cable to it. It should auto detect. Start the car and then go toFile and down to ...

If you have a laptop then you can log all you want without it freezing so it must be the pids on the tuner that has the issues. I logged 2 hours of driving with no hault monitoring or any issues logging realtime with the dataviewer. It has to be something in the programming of the PIDs in the crom ...

Trinity is a expensive paperweight until an update fixes the problem. I can log or create layout PIDs and it freezes still with the latest updates.

03 Dodge SRT4 S1
Trinity with version 1r10g
Bootloader: 0.0

Well I tested out "trinity_dcx_gas-1r10g_update.crom" today. Not pleased! Reset the Trinity and went through the Vehicle setup for the 03 dodge SRT 4. I have the S1 PCM btw. WELL now lets get to it. So the trinity is in and hooked up to the car. First thing I did was delete all the PID layouts and ...

Ok so I must be an idiot or just really F'ing irritated with this trinity. How do you load the 1r10 crom so that I can get this POS to log a run instead of freeze?

Thanks. I might have a trinity that's in a million pieces soon.


Ok restore your original backup to the car first and then ...