With the extreme power puck are you able to change the tunes from like extreme to tow on the fly?

Got my trinity replaced with a new one.. The old trinity would not turn on and I was stuck with the extreme tune.. So before I try to do anything with the new trinity.. What do I do? I'm still stuck on the extreme tune.. Can the new trinity I have re flash back to the stock tune? Or what?

I just plugged it into my computer and it does turn on! It didn't last night though.. I re checked this morning and the obd2 cable looks fine, re-checked my obd2 port and it's fine, it just won't power up when plugged into my pickup.

I bought it brand new from a retail performance shop too' and I can get another copy
Of the recipt if needed!

I got an 04 ram diesel with 5.9 cummins. I was installing the a pillar and attachment and running the wires for my egt probe. Never hooked any of them up because I was going to get a right angle
Drill. Started the truck up, trinity would not come on.
Checked the cable, looks fine. Hooked it up to my ...

Is there a Write up or better instructions on the egt set up
As far as drilling and tapping? The instructions say a 7/64 bit and an 1/8 tap are all that are needed. But a 7/64 bit is way too small and from what I've found an 11/32 bit is the correct bit for an 1/8 tap. Could someone please clarify ...

I have 3 wire pins, a 4 pin connector and 4 wires from
The analog cable has 4 wires. Green and white which is analog 2
And red and black is analog one. Does matter where these wires go
In the connector? Are the grounds supposed
To be put together? I'm just a little confused and dont want to
Screw ...

Viola! Problem solved! Thank you sir!

I bout the adapter piece to put the trinity in the a pillar gauge spot. And I cant seem to get it to stay in there. What's the secret? I don't want to break anything. I'm trying to put it in a factory srt8 ram sigle a pillar mount

Oh okay cause I am only getting 22 psi at WOT and no smoke out of the performance tune so I'm trying to figure out if I've got a problem or not. I got a Volant cold air intake and muffler delete as far as performance stuff for now.

When it says like 3.26 is that 3 psi? Or another value?

Yes 1r08 with all the updates. Only one option under synthesized is the boost delta. I don't have just a boost option..

No sir, only thing there is the boost delta

I just got my trinity installed on my early 04 dodge ram 2500 diesel 4x4 and I wanted to monitor my boost pressure.. But all I could find is the "boost delta" it measures in psig. Is there just a regular boost setting? Or can someone explain the boost delta to me please? Thank you!