You will basically just need to Purchase a Custom Tune so that your PCM will work with the new engine.

The APZ2AH00 is a new calibration from Ford that the U7160 Predator that you have will not support. You will need to use a U7165 Predator to reprogram this Truck. You can contact the Sales department at 877.396.6614 for trade in options.

What does the round whilte sticker on the back of the Predator say? What revision is on the Predator? It will be at the top of the screen after the Predator boots up.

Either one of yours is close enough. The one I have always used is 204.8 or divide the counts by 1024 and multiply by 5.

It sounds like this Predator is an old revision and needs to be updated. Plug the Predator in and when it gets to the main menu after booting, at the very top it will give you a Revision # what does that say? If it's not v.7r50d then you need to update the Predator to the latest revision. You can ...

The Performance Tunes in the Predator are made for 93 Octane, so pulling the 10% out would help, maybe you could try removing another 5% and see how it does? Do you have any other modifications done to your truck, like a CAI etc... If you think you might be running on the lean side you can check ...

You will need to fax a copy of your Invoice where Ford reflashed your PCM to Tech Support at 561 908 0051 then give Tech Support a call at 561 908 0040 and they will be able to get you up and running again. Since Ford reflashed your PCM you will most likely need to update your Predator to the latest ...

Which tune are you running? What octane fuel are you running? If you are running the Performance tune with only 87 octane fuel in the tank this could be what is causing your issue. Try pulling another 10% spark from 4 - 7k and see if this helps get rid of your pinging.

The MAF.ia. will not add any HP. The only reason you would need to install a MAF.ia. is if you are getting close to pegging your MAF. Normally with a 4# pulley you are pretty safe from pegging the MAF. I recommend adding a MAF.ia. if your MAF_V is getting close to 4.8 Volts or 980 counts.

You will need to get a Custom Tune from one of our CMR dealers because of the BBK CAI, most likely the reason your car is pinging is because the current tune is way too lean with the CAI installed.

Most likely you just need to update your Predator to the latest revision and everything will work fine. You can get the latest revision and the instructions on how to load it to your Predator from the following link.
http://www.diablosport.com/index.php?mo ... lay&pid=44

No, the Predator will only program 1 vehicle at a time. You can use the Data Monitoring/Logging and Diagnostics features on any amount of vehicles you want.

Go to the Options menu and select Show Last Tune Written. What does it say?

What Vehicle & Predator model?

The Predator does not currently support programming the 1996 & 97 vehicles because they use a different PCM.