No....

penlight wrote: ↑Wed Aug 21, 2024 1:36 pm I did nothing with the i3 after loading the canned procharger tune. Does that make this undoable?

Yes it does... you can't do anything with your inTune now... see my reply above...

if you installed the procharger tune with your inTune, but then you went and had it tuned at a shop with hptuners/efilive tuning software, then you can't do anything with the inTune now... It will detect that the tune in the truck is different than the "last tune written" that the inTune h...

No... You have to modify the ECM tune during the install and disable the AFM/DFM setting... then exit back out and install/apply the tune... and that will reinstall the preset canned ECM tune with the AFM/DFM disabled...

no you can't monitor/change that... and the different modes will function the same as stock, since the transmission in that car can not be tuned at all anyway...

you can not adjust part-throttle normal driving shift pionts yourself with the tool... that can only be done via getting a custom tune done...

My wife's 2016 Suburban 5.3... submitted the form info...

that predator is decades old man... and hasn't been supported for at least 15 years now... there are no fixes/updates for it...

how come my itune i3 dosnt have the spark option or the fuel option you probably have the inTune i3 8200 version, which is the 50-state (California) version tool... it doesn't have all of the available parameters to adjust like the full inTune i3 8245 Platinum version tool... The 8200 version has l...

Clayton... I do not tune for e85... Once the custom tuning process is done/complete - which was done a year ago - then you could use e85 again if you want, ONLY IF your truck is a factory flex fuel vehicle - which it is not... and you do get worse mileage with e85, so you'd be filling up more often,...

you need to have the inTune i3 8200 or 8245 Platinum, or the Trinity T2 EX 9200 or 9245 Platinum version tool for that truck... Look at the sticker on the bottom of the box it came in...

It re-writes the whole tune... You would select the preset canned tune you want to install, then choose to Modify it to make the adjustments you want, then exit back out and install/apply the tune... That will install the preset canned tune you selected with the adjustments you made to it.

Do NOT go by the sidewall sizing.. you need to actually measure your tire height, from the ground to the top of the tire, and you'd use that inches amount to set the tire height/diameter... so then you'd go to Tune Vehicle - Advanced Mode, and select the ECM tune to install.. then choose to Modify t...

so then just fill out the address fields...

there's nothing to ship... the additional license is a downloadable software update for the programmer... nothing gets shipped anywhere... After you complete your purchase of the license, wait about 10 minutes.. and then run the Update Agent program again to update your programmer with the new licen...