2000 F350 help with I'm two horny chip

DeltaChip Support

Moderator: mikel

Post Reply
vtwinjunkie
Posts: 3
Joined: Mon Oct 17, 2011 12:20 am

2000 F350 help with I'm two horny chip

Post by vtwinjunkie »

I have a 2000 f350 7.3 L and I am not sure if it has been reflashed before but it runs realy good and this leads me to believe that maybe it has....and my buddy just gave me the I'm two horny chip out of his (early model) 99 f350.

It did not come with a switch to go back and forth between the positions for the chip.

1). Where can I find the switch?

2). Where can I find out what programs are on it? remap ect? Is there a website or contact info for this?

3). Will it work with my truck? can I just plug it in even though my truck may have been reflashed? would this harm my truck?
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

RE: 2000 F350 help with I

Post by mikel »

Plug it in, if it starts and runs, it works, if not, it will need to be flashed to your specific calibrations.

Not all chips had a switch.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
vtwinjunkie
Posts: 3
Joined: Mon Oct 17, 2011 12:20 am

RE: 2000 F350 help with I

Post by vtwinjunkie »

Ok great.
I thought all of the Im two horny chips all were two position switches?

Will It do any damage if my truck has already been flashed? or will it simply over ride the flash?
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

RE: 2000 F350 help with I

Post by mikel »

if the chip is set for a different calibration, the truck will either not start, or will start and run poorly.

if so, remove the chip with the keys out of the ignition, and have it flashed to your calibration.

Tahnks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
vtwinjunkie
Posts: 3
Joined: Mon Oct 17, 2011 12:20 am

RE: 2000 F350 help with I

Post by vtwinjunkie »

Ok....the truck will not start. where do I have it flashed to my calibration?
Post Reply