Calibration ID Issue
Calibration ID Issue
I am planning on purchasing the i3 +PCM Swap for my 2016 Ram 1500 so it will require an unlocked PCM for tuning. I removed my PCM and there is a bunch of black tar like substance covering the back of it. I can not read the Calibration ID off of the PCM in full so I am wondering of there is any other way of finding the Calibration ID?
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Calibration ID Issue
Hmm, got a pic maybe?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: Calibration ID Issue
Extremely late reply but I finally got around to pulling the ECU again to take pictures. Here is what I’m talking about. I tried cleaning off the tar but it ended up wiping off part of the sticker so I left it. I can’t read the Calibration ID As you can see. Is there any other way to get that information?
- Attachments
-
- 14EE189C-812F-4DC3-9125-4473035A7745.jpeg (1.04 MiB) Viewed 3385 times
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Calibration ID Issue
68243303AA is what we need...
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com