2019 Charger Scat Pack Engine won’t start after install PCM

General Tech Support Questions

Moderators: mikel, 06MonteSS

Post Reply
m7alfayez
Posts: 17
Joined: Sat Apr 11, 2020 4:58 am
Location: Saudi Arabia

2019 Charger Scat Pack Engine won’t start after install PCM

Post by m7alfayez »

Good day DiabloSport team,
I hope you’re in good health.

I have a 2019 Dodge Charger Scat Pack and recently I bought PCM and Trinity device from your website. I did the installation by following the instructions for installing the PCM but the car won’t start and the security light is on.
I re-installed the OEM PCM and everything is ok. So could you please advise what is the issue?

Thank you,,
2019 Dodge Charger Scat Pack:
- AFE Momentum GT Cold Air Intake System.
- Hellcat Dynamic Air Scoop.
- JBA 1 3/4" Stainless Longtube Headers.
- Mishimoto Thermostat.
- Billet Technology Oil Catch Can.
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: 2019 Charger Scat Pack Engine won’t start after install

Post by mikel »

theres a few threads discussing this, and there are instructions in the box with the pcm that explain the process of reading data from the stock pcm that has to be loaded t the new pcm before it will run the car.

On a JL or any 19+ model dodge/jeep/ram, a replacement/modified pcm will not work until you have followed the instructions on the paper in the box with the pcm.

Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
m7alfayez
Posts: 17
Joined: Sat Apr 11, 2020 4:58 am
Location: Saudi Arabia

Re: 2019 Charger Scat Pack Engine won’t start after install

Post by m7alfayez »

Thanks Mikel.
Mistakenly I threw that paper. Kindly attached here.

Thank you.
mikel wrote:theres a few threads discussing this, and there are instructions in the box with the pcm that explain the process of reading data from the stock pcm that has to be loaded t the new pcm before it will run the car.

On a JL or any 19+ model dodge/jeep/ram, a replacement/modified pcm will not work until you have followed the instructions on the paper in the box with the pcm.

Thanks
2019 Dodge Charger Scat Pack:
- AFE Momentum GT Cold Air Intake System.
- Hellcat Dynamic Air Scoop.
- JBA 1 3/4" Stainless Longtube Headers.
- Mishimoto Thermostat.
- Billet Technology Oil Catch Can.
m7alfayez
Posts: 17
Joined: Sat Apr 11, 2020 4:58 am
Location: Saudi Arabia

Re: 2019 Charger Scat Pack Engine won’t start after install

Post by m7alfayez »

Hello,
If you mean that paper. Yes, I followed.
Got it from Youtube but I’m not sure if that instructions works for 19 also.

Image
Thanks,
2019 Dodge Charger Scat Pack:
- AFE Momentum GT Cold Air Intake System.
- Hellcat Dynamic Air Scoop.
- JBA 1 3/4" Stainless Longtube Headers.
- Mishimoto Thermostat.
- Billet Technology Oil Catch Can.
m7alfayez
Posts: 17
Joined: Sat Apr 11, 2020 4:58 am
Location: Saudi Arabia

Re: 2019 Charger Scat Pack Engine won’t start after install

Post by m7alfayez »

Hello,
I would like to update you I followed this topic https://forum.diablosport.com/viewtopic ... 69&t=77842
nd everything is working fine now.

Thanks a lot!
2019 Dodge Charger Scat Pack:
- AFE Momentum GT Cold Air Intake System.
- Hellcat Dynamic Air Scoop.
- JBA 1 3/4" Stainless Longtube Headers.
- Mishimoto Thermostat.
- Billet Technology Oil Catch Can.
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: 2019 Charger Scat Pack Engine won’t start after install

Post by mikel »

glad to hear it.
I'll check on the papers not being in the box.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
Post Reply