Hey guys,
I'm new to Diablo CMR and Power Strokes, but have been tuning Duramax and Cummins with EFILive for some time now...
CMR platform looks pretty similar, but I had a couple questions about the capabilities of the CMR on the 6.0 Power Stroke...
1.) Can you disable the EGR system and any code reporting?
2.) Can you disable the VVT turbo system for install of aftermarket turbos?
3.) Is the 6.0 switchable on the fly with the Trinity or the In-Tune?
Thanks a million!
Couple questions about CMR on 6.0 Stroke
Moderator: mikel
- punisherperf
- Posts: 17
- Joined: Wed Jul 25, 2012 9:58 pm
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Couple questions about CMR on 6.0 Stroke
1. Yes.
2. Not sure...lemme check.
3. No, its all flash based...
Thanks
2. Not sure...lemme check.
3. No, its all flash based...
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Couple questions about CMR on 6.0 Stroke
2. You can zero out any VGT settings to disable them.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com