U7186 Needs to be reset back to factory settings, How?
Moderator: mikel
U7186 Needs to be reset back to factory settings, How?
2006 GMC Sierra Duramax. Had to get a new ECM put into the truck because my dad had the dang thing running while he was trying to install and fried the computer so now it has a new original backup. Problem is, my tool still contains the old original backup. Anyway to clear it so that I can get this thing back onto my truck? Tool won't receive any updates until original backup can be installed onto the truck or cleared. I do not want to try to install the old original backup over the new code in the truck with the new ECM; afraid that will cause even more problems.
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
fax proof of replacement to 561-908-0048 then call within an hour with the tool powered up so we can unlock it.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
hold times can get up there during the middle of the day...
proof of replacement is a copy of the work order from the dealer.
proof of replacement is a copy of the work order from the dealer.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com