16 explorer new device setup
-
- Posts: 8
- Joined: Thu Sep 28, 2017 3:20 pm
16 explorer new device setup
I am struggling to get my new Trinity setup on my 16 explorer sport (3.5L ecoboost). I thought I set everything up correctly. However anytime I hook it up to Expo it causes a bunch of errors to pop and nothing seems to run, can't run anything on the device. Anyone seen this before, I am assuming this is user error at the moment.
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: 16 explorer new device setup
you'll get lots of errors on dash while its reading and writing, thats totally normal, best to just let it do its thing, dont interrupt it.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
-
- Posts: 8
- Joined: Thu Sep 28, 2017 3:20 pm
Re: 16 explorer new device setup
mikel wrote:you'll get lots of errors on dash while its reading and writing, thats totally normal, best to just let it do its thing, dont interrupt it.
SO I did that, it seems to get caught in a loop. Once I get to performance and it runs shouldnt I get options before it reboots and errors run?
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: 16 explorer new device setup
im not sure I follow.
You should go to performance, select a tune then it will read, and during that time, lots of stuff will happen in the truck/on the dash.
Thanks
You should go to performance, select a tune then it will read, and during that time, lots of stuff will happen in the truck/on the dash.
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
-
- Posts: 8
- Joined: Thu Sep 28, 2017 3:20 pm
Re: 16 explorer new device setup
mikel wrote:im not sure I follow.
You should go to performance, select a tune then it will read, and during that time, lots of stuff will happen in the truck/on the dash.
Thanks
So I go to performance, it says wait 5 seconds, then reboots.....
-
- Posts: 8
- Joined: Thu Sep 28, 2017 3:20 pm
Re: 16 explorer new device setup
I have gotten this to work. I am now ready to start a more detailed tune. Does Diablosport offer custom tunes or have any shops that are certified to do so?