So if you turn it off in the tune on an unlocked PCM, would the Dealer be able to detect that there is an unlocked tuned PCM in the vehicle with the code shut off in the tune ?mikel wrote:Ill turn it off in the tune, b ut it doesnt truly resolve the issue.idangerous wrote:If I buy a CMR License can I turn this code off myself ?
Code will come back if dealer flashes the pcm or if stock pcm is reinstalled.
Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
Moderator: mikel
-
- Posts: 13
- Joined: Thu Jan 29, 2009 9:15 am
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
dealer can only detect what the pcm tells them, so if it doesn't throw the code they have nothing to check for or reason to look.
As mentioned, if they flash the pcm or replace it, the code will then appear.
As mentioned, if they flash the pcm or replace it, the code will then appear.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
My dealer saw 2 things, the p1400 code with the aftermarket calibration, and a non OEM PCM part number, from when the unlocked one was installed. So seems like they will see the different part number even if they dont see the code.
-
- Posts: 13
- Joined: Thu Jan 29, 2009 9:15 am
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
Is there any possiblity of adding the option to turn off this code with the Trinity ?
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
it an be disabled in a custom tune as previously mentioned, but its not a 100% solution.idangerous wrote:Is there any possiblity of adding the option to turn off this code with the Trinity ?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
Has anybody tried replacing and reprogramming the BCM?
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
Ive seen dealers do it to get rid of the code when they were confused as to why it was there or where it came fromcapcas wrote:Has anybody tried replacing and reprogramming the BCM?
PCMs ordered for any Car application for the past 3 weeks or so no longer trigger this code when installed.
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
Still nada for those of us with the code? Wouldnt a dealer need to program a new BCM? Kinda doesnt help really since they know it was there and reported already no?mikel wrote:Ive seen dealers do it to get rid of the code when they were confused as to why it was there or where it came fromcapcas wrote:Has anybody tried replacing and reprogramming the BCM?
PCMs ordered for any Car application for the past 3 weeks or so no longer trigger this code when installed.
Thanks
-
- Posts: 13
- Joined: Thu Jan 29, 2009 9:15 am
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
Is there any progress toward finding a solution for your customers who installed an unlocked PCM and tune, purchased from you, and now have a P1400 code that may be grounds for having their factory powertrain warranty restricted if they bring their vehicle in to the Dealership for service or repairs ? While still advertising that the Dealer can not detect your product when used as advertised ?
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
It is quite clear they don't care about this. They sold a product that was not as advertised. Might be time to look into legal action for a resolution. I can say for sure, I will never buy a product from them again. I've had a few of them over the years, the customer service side leaves quite a lot to be desired.idangerous wrote:Is there any progress toward finding a solution for your customers who installed an unlocked PCM and tune, purchased from you, and now have a P1400 code that may be grounds for having their factory powertrain warranty restricted if they bring their vehicle in to the Dealership for service or repairs ? While still advertising that the Dealer can not detect your product when used as advertised ?
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
I will provide a custom tune to disable the code for anyone who would like that.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
What happens when the stock pcm is put back in for dealer/warranty service? Is the code gone, or does it come back?mikel wrote:I will provide a custom tune to disable the code for anyone who would like that.
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
Just noticed this on my 17 Jeep Grand Cherokee 5.7. I have an i2.
I think the solution is new Diablo PCM, new oem BCM, then you have to have dealer perform "restore configuration" on new BCM with original PCM installed. This downloads the original configuration from chrysler server for that VIN.
Problem is, all the $ it would cost to give everyone new PCM and BCM, and then hoping your dealer runs a "restore configuration" for you. DS could download for each VIN and send a software update to reconfigure, but this is obviously a huge task for them. It's a lose / lose for us...
I think the solution is new Diablo PCM, new oem BCM, then you have to have dealer perform "restore configuration" on new BCM with original PCM installed. This downloads the original configuration from chrysler server for that VIN.
Problem is, all the $ it would cost to give everyone new PCM and BCM, and then hoping your dealer runs a "restore configuration" for you. DS could download for each VIN and send a software update to reconfigure, but this is obviously a huge task for them. It's a lose / lose for us...
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
It's clear Diablo could give a crap about this. They got their money is what it comes down to. I'll never use their garbage products ever again. Customer service goes a long way, which for them is non existant.
Re: Programing sets a P1400 AFTERMARKET CALIBRATION DETECTED
Hello,
Just wondering if this issue is resolved for 2015 JK Jeep sport?
Would the dealer know if I swapped the tuned PCM with the factory original Locked PCM.
Will it show a trace or P1400 code or any other code or log?
Also when installing the PCM issued by Diablo and talking the Factoy PCM, would that be detected by the dealer.
I am looking to buy the Trinity 2 for Jeep with PCM and custom tune for off-roading in Sand Dunes.
Wanted to know if this product “Trinity2 + PCM” would compromise my warranty by being detected.
Cheers
@mikel
Just wondering if this issue is resolved for 2015 JK Jeep sport?
Would the dealer know if I swapped the tuned PCM with the factory original Locked PCM.
Will it show a trace or P1400 code or any other code or log?
Also when installing the PCM issued by Diablo and talking the Factoy PCM, would that be detected by the dealer.
I am looking to buy the Trinity 2 for Jeep with PCM and custom tune for off-roading in Sand Dunes.
Wanted to know if this product “Trinity2 + PCM” would compromise my warranty by being detected.
Cheers
@mikel