Board index inTune i-1000 Technical Discussion General inTune forum need to tune for 3.09 rear, but closest option is 3.06

need to tune for 3.09 rear, but closest option is 3.06

Post questions or any issues with your inTune here.

Posts: 3
Hey,

I've got an Intune i-1000 and am trying to program my 2005 Dodge Magnum RT for a new rear diff I installed that is a 3.09 gear. My intune only has the 3.06 as the closest option. I tried updating my tuner last night and still only have those options. Am I going to have to get a newer tuner like a Trinity or can different gears be added as part of a custom email tune?

I can get the serial number and such off the tuner later today, at work at the moment.

Thanks


Posts: 3
So after emailing with Johan it doesn't look like I can add the ratio I need to my Intune i-1000. I'm assuming it'll throw some sort of error if I drive with it set to the incorrect ratio right? Or would it just throw off my speedo?

If I can't drive it, would anyone know if any of the newer tuners Diablo offers would have the correct ratio for my car?


Posts: 55264
Location: DiabloSport World Headquarters

3.06 will work fine.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Posts: 3
Thanks for the reply. I currently have the ESP/BAS light kicking on after driving a short distance, but that could be due to a bad sensor. I need to investigate it a bit more still. A friend was helping install the new cradle and he zip tied the wheel speed sensor wires to the wrong spot and they got stretched a bit before I noticed it. So that could be my issue at the moment.


Posts: 55264
Location: DiabloSport World Headquarters

My guess is the lights are not related to the speedo.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Return to General inTune forum