I2 Problems Car Dead on Dyno
Moderator: sohfast94
I2 Problems Car Dead on Dyno
Ok so a couple problems I am having with a brand new I2. So I have a car stuck on the Dyno...
Problem 1-
I can not get the I2 to connect to my laptop that has my CMR software. Attached are the pics of my computer screen. I tried downloading the drivers and that did not help any.
So after failing to get Problem 1 resolved, I hooked up the I2 to a different computer (which connected to it). I was planning on emailing myself the files back & forth from the CMR Laptop to the Computer that Could connect to the I2.
Problem 2-
I ran the "Device Updater" because the 2012 Challenger I hooked it to, said it was not supported. I then went back to try again on the Challenger, it said it needed to download a "calibration update". -It failed on that and reboots to a "Recovery Mode". When I get it to go into Calibration Update again, it just stays on that screen FOREVER and never does anything. The car now does NOT start or do anything.
So these are the two problems I am having. Someone Please help.
Problem 1-
I can not get the I2 to connect to my laptop that has my CMR software. Attached are the pics of my computer screen. I tried downloading the drivers and that did not help any.
So after failing to get Problem 1 resolved, I hooked up the I2 to a different computer (which connected to it). I was planning on emailing myself the files back & forth from the CMR Laptop to the Computer that Could connect to the I2.
Problem 2-
I ran the "Device Updater" because the 2012 Challenger I hooked it to, said it was not supported. I then went back to try again on the Challenger, it said it needed to download a "calibration update". -It failed on that and reboots to a "Recovery Mode". When I get it to go into Calibration Update again, it just stays on that screen FOREVER and never does anything. The car now does NOT start or do anything.
So these are the two problems I am having. Someone Please help.
You do not have the required permissions to view the files attached to this post.
Re: I2 Problems Car Dead on Dyno
they've been closed since thursday for the holiday man.. they'll be back in the office on Monday..
06MonteSS / DiabLew Tune
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net
Re: I2 Problems Car Dead on Dyno
Ya, i figured I wouldn't get a response till Monday.
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: I2 Problems Car Dead on Dyno
try disconnecting the batt cables and touch them together to drain voltage then reconnect and let tool try recovering again please.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: I2 Problems Car Dead on Dyno
Ok, I did the battery thing. Now I keep getting these screens when it goes into recovery mode:
You do not have the required permissions to view the files attached to this post.
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: I2 Problems Car Dead on Dyno
please post all files from the i2 drive here including tunes, runtimes, and the info.xml file.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: I2 Problems Car Dead on Dyno
Ok, dont forget problem one:
Problem 1-
I can not get the I2 to connect to my laptop that has my CMR software.
So I have to take it from one computer and load it on this one.
Problem 1-
I can not get the I2 to connect to my laptop that has my CMR software.
So I have to take it from one computer and load it on this one.
You do not have the required permissions to view the files attached to this post.
Re: I2 Problems Car Dead on Dyno
more
It wont upload "runtime_16.dbg" Says that it is EMPTY
It wont upload "runtime_16.dbg" Says that it is EMPTY
You do not have the required permissions to view the files attached to this post.
Re: I2 Problems Car Dead on Dyno
more.
There are "No Files" in the "Tunes" folder.
There are "No Files" in the "Tunes" folder.
You do not have the required permissions to view the files attached to this post.
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: I2 Problems Car Dead on Dyno
OK, hold tight for 10 minutes as we confirm something.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: I2 Problems Car Dead on Dyno
OK, please plug the tool into a pc, and delete all the runtime files.
then, click NO on the screen and let the tool sit on the main menu, then load the attached file to the i2 drive and let the tool import it.
once its done, plug it bacvk into the car and let it recover and it should work.
Let me know, then we'll sort out your cmr, but if the drives are there, its all working
then, click NO on the screen and let the tool sit on the main menu, then load the attached file to the i2 drive and let the tool import it.
once its done, plug it bacvk into the car and let it recover and it should work.
Let me know, then we'll sort out your cmr, but if the drives are there, its all working
You do not have the required permissions to view the files attached to this post.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: I2 Problems Car Dead on Dyno
Ok, I did all of that. Now its doing this whole crazyness:
https://youtu.be/6qwEPSTU7sw
UPDATE: Disregard the above vid, it started to go
https://youtu.be/6qwEPSTU7sw
UPDATE: Disregard the above vid, it started to go
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: I2 Problems Car Dead on Dyno
Cool, let me know if it completes.
In CMR, just browse to the folder where the tunes are on the i2 drive and you can open them from there.
Save your custom tune to the PC, then put a copy of it in the root of the i2 drive and the tool will import the custom tune.
Thanks
In CMR, just browse to the folder where the tunes are on the i2 drive and you can open them from there.
Save your custom tune to the PC, then put a copy of it in the root of the i2 drive and the tool will import the custom tune.
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: I2 Problems Car Dead on Dyno
all good?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com