P2 and the Previously Tuned SRT4

Discuss Predator 2 for Chrysler vehicles

Moderator: sohfast94

Post Reply
User avatar
nemiro
Posts: 79
Joined: Sat Apr 24, 2010 4:32 pm
Location: Holt, FL
Contact:

P2 and the Previously Tuned SRT4

Post by nemiro »

I have an 04 SRT4 in that I am trying to tune with a P2 Platinum. After initially plugging in, then running updates on the P2, I went to save the original tune. Briefly on the screen, it mentioned that the tune is not original stock, and was previously tuned. It then seemed to record whatever calibration was onboard. I took the P2, pulled the original tune, made my changes, and then went to put the modified tune on. FWIW, the tune appeared to be all stock in CMR. During the attempt to put the modified tune into the PCM, the P2 errors out at 0% writing, and enters recovery mode. I follow the instructions, but it is in an endless loop of not recovering and not writing the modified tune, either.

I have gathered this and other info, along with the device log, and sent to MIKEL. I tried following up with a phone call, but after being on hold for an extended period of time, I was disconnected. Is anyone there? I have a customer's car sitting in my shop. Thanks!
__________________________
Neil Emiro - ND Performance
http://www.ndperformance.com
User avatar
mikel
Posts: 56742
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: P2 and the Previously Tuned SRT4

Post by mikel »

replied to your email the other day, let me know.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
User avatar
mikel
Posts: 56742
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: P2 and the Previously Tuned SRT4

Post by mikel »

did you get the reply from Brian? Lets just swap this for an i3, seems you arent getting my emails.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
Post Reply