Streaming to data viewer
Moderator: sohfast94
Streaming to data viewer
I had read online that we could stream data from our trinity 2 to data viewer but i can't get it to work it will never connect, any suggestions anybody? Seems like every custom tuner needs atleast 20 pid's but t2 can only do 16 pid's is there any fix or work around?
Re: Streaming to data viewer
Well instructions were incredibly wrong on how to stream data from a trinity 2 but i figured out the correct procedure to get it working and now i can data log with the data viewer.
Re: Streaming to data viewer
So crazybob, how did you get it to work? I'd like to do that.
Re: Streaming to data viewer
My t2 might be messed up but here it is,
1. Have powered usb hub connection for laptop.
2. Leave t2 connected to obd2.
3.start vehicle.
4. Connect t2 via usb to laptop.
5.start ignition software and minimize
6.start data viewer and hit connect.
I had to vary the cable connection order sometimes but if the t2 goes into demo mode it never works right, sometimes I've had to have both obd2 and usb connected at the same time to start the process. It is very frustrating.
1. Have powered usb hub connection for laptop.
2. Leave t2 connected to obd2.
3.start vehicle.
4. Connect t2 via usb to laptop.
5.start ignition software and minimize
6.start data viewer and hit connect.
I had to vary the cable connection order sometimes but if the t2 goes into demo mode it never works right, sometimes I've had to have both obd2 and usb connected at the same time to start the process. It is very frustrating.