Wideband readings off

This area of the forum is for discussions relating to the T2 monitor/tuner on Chrysler vehicles.

Moderator: sohfast94

Post Reply
zues29
Posts: 13
Joined: Fri Apr 22, 2011 1:47 pm

Wideband readings off

Post by zues29 »

my readings on trinty 2 are off my eas is hooked up to white wire 5v and my aem is reading 14.7 like it should at idle but trinty is reading 13.7 at idle how can i adjust?
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Wideband readings off

Post by mikel »

did you scale it using the values provided by AEM?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
zues29
Posts: 13
Joined: Fri Apr 22, 2011 1:47 pm

Re: Wideband readings off

Post by zues29 »

not sure how do i go about doing that mike?
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Wideband readings off

Post by mikel »

you have to enter the upper and lower bounds for the 0V and 5V values for the device to know what to display for the incoming Voltage reference.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
Post Reply