2004 Ford Lightning Tuning Parameters

[k_romberg]

Hello,

I am thinking about buying the 9145 model for my truck. On the website, it shows these features:

• 91 Octane Performance Tune: 35HP 40TQ
• 93 Octane 2.81 Pulley Tune: 70HP 85TQ
• 93 Octane 90 mm MAF Tune: 90HP 100TQ
• 93 Octane 2.81 Pulley and 90 mm MAF Tune: 90HP 100TQ
• 91 Octane 2.81 Pulley Tune: 45HP 50TQ
• 91 Octane 90 mm MAF Tune: 45HP 50TQ
• Touch Screen - Y
• Data Logging - Y
• Check Clear DTCs - Y
• Accepts Custom Tunes from CMR - Y
• Calibrate Speedometer for Gear Ratio - Y
• Calibrate Speedo for Tire Size - Y
• Fuel Rich/Lean Adjustment - Y
• Spark Timing Advance/Retard - Y
• Idle RPM - Y
• Top Speed Limiter - Y
• Rev Limiter - Y
• Shift Points - Y
• Shift Firmness - Y
• Torque Management Adjustment - Y
• Global Line Pressure Adjustment - Y

Does "Fuel Rich/Lean Adjustment" refer to closed loop tuning for affecting the TRIMs or does it refer to WOT enrichment? Is it a global modifier or are they RPM ranges where it can be adjusted?

Does "Spark Timing Advance/Retard" refer to global spark adjustment or are there RPM bands where it can be adjusted?

What is the granularity for adjusting the "Shift Points" and "Shift Firmness"?

Is there a MAF scaling option?

If I connect an external sensor to the unit using the EAS UNIVERSAL SENSOR INPUT kit, can that sensor data be included in the data logging?

I think the unit has a lot of potential, but I would like to know more before I pull the trigger and buy one.

Thanks,
Keith

[mikel]

Fueling adjustments are for WOT
Timing is WOT on the ranges and also a global option.
Shift points are 100 rpm increments, not exactly sure on pressure, as I think its % based.
No MAF scaling option.
EAS is not supported in Dataviewer for playback at the moment, but an update is in the works to allow that.


Thanks