Check engine light on Dodge 6.7

lsimmons · Post by **lsimmons** » Tue Aug 11, 2009 4:02 pm

I just installed the PPE on my Dodge 6.7 and it set off the check engine light. I checked all my connections and they are fine. Is this something that i will just have to live with? Or is this something that is not supposed to happen?
Please let me know what i need to do to fix this!! i want to keep the power puck, it is awesome!

-thanks

Post by **mikel** » Tue Aug 11, 2009 4:30 pm

Take it to an auto parts store and ask them to read it, write down the code, and let me know what it is.

lsimmons · Post by **lsimmons** » Tue Aug 11, 2009 5:56 pm

ok i will. can autozone do it?

lsimmons · Post by **lsimmons** » Tue Aug 11, 2009 7:45 pm

ok i got the codes checked. It threw codes:

P-0192 - Fuel Pressure Sensor Low
P-0340 - Crankshaft Position Sensor Circuit-Bank 1, Sensor 1
P-0402 - EGR Flow Excessive
P-0405 - EGR Position Sensor Circuit Low
P-0652 - Sensor Reference Voltage 2 Low

None of these codes were there before i installed the power puck

I have not done anything else to the truck.....

-thanks again

Post by **mikel** » Wed Aug 12, 2009 9:47 am

Looking into this...

lsimmons · Post by **lsimmons** » Sun Aug 16, 2009 9:01 pm

ok well i got a friend of mine that is a cummins mechanic to clear the codes. That was friday morning. i have not had any of them come back

. So im guessing it just threw the codes right after i installed it or something. maybe one of the plugs was loose or something. I will let you know if any come back. Thank you for responding to this.

-Logan

Post by **mikel** » Tue Aug 18, 2009 11:38 am

Good deal, let us know.

Check engine light on Dodge 6.7

Check engine light on Dodge 6.7

RE: Check engine light on Dodge 6.7