WHERE TO START

daves09sierra · Post by **daves09sierra** » Wed Dec 02, 2009 12:44 am

Im new to this forum and have recently purchased a 09 sierra 4x4 aswell as a predator tuner. The only thing I have done to the truck so far is a catback exhaust and was woundering where to start with the programmer. I am new to this so please bear with me as Iam very green at all this tuning. Any advice would be greatly appreciated

I forgot to mention it has the e85 compatable 5.3 in it

Post by **06MonteSS** » Wed Dec 02, 2009 9:43 am

do some logging and get your fueling dialed in correctly...

http://diablosport.com/index.php?name=P ... opic&t=917

daves09sierra · Post by **daves09sierra** » Wed Dec 02, 2009 2:50 pm

Im not sure how to do that Like I said Im new to this and really need some dirrection on how to do that I know Im probably asking a question that has been asked 100 times before LOL

Post by **mikel** » Wed Dec 02, 2009 2:53 pm

the link he posted has all the info you need....

daves09sierra · Post by **daves09sierra** » Wed Dec 02, 2009 3:21 pm

thanks I will check it out

daves09sierra · Post by **daves09sierra** » Wed Dec 02, 2009 10:58 pm

OK I came up with one other question where would I get a power cord and cable from?

Post by **06MonteSS** » Thu Dec 03, 2009 9:35 am

http://www.shopatron.com/products/produ ... 56.0.0.0.0?

daves09sierra · Post by **daves09sierra** » Wed Dec 16, 2009 4:59 pm

I have gone to the local electronics store and did find the serial port to usb cable but there are more than 1 choice for the ac to 12v adapter The guy at the store says he needs to know what watage adapter I will need if someone knows and could let me know that would be great

Post by **06MonteSS** » Wed Dec 16, 2009 5:17 pm

12v 1 amp power supply (2.5 x 5.5mm tip, center is positive)

daves09sierra · Post by **daves09sierra** » Wed Dec 16, 2009 5:20 pm

thanks 06 montess

Post by **06MonteSS** » Wed Dec 16, 2009 8:54 pm

np man, you're welcome!!

daves09sierra · Post by **daves09sierra** » Wed Dec 16, 2009 9:04 pm

OK so now I have the usb cord and the power adapter and thanks again monteSS but now I dont seem to be able to find or should I say get the drivers for it any help would be greatly appreciated on where or how to get the drivers

Post by **06MonteSS** » Wed Dec 16, 2009 9:25 pm

the usb cable you bought should have come with drivers for it...

WHERE TO START

WHERE TO START

RE: WHERE TO START

RE: WHERE TO START

RE: WHERE TO START

RE: WHERE TO START