Tuner for 07 Toyota Tundra 5.7?
Moderator: mikel
-
programerordie
- Posts: 8
- Joined: Sun Jan 10, 2010 4:11 am
-
programerordie
- Posts: 8
- Joined: Sun Jan 10, 2010 4:11 am
Good to hear. Notice: If your at the track, and having traction issues, you may want to try launching with VSC TCS OFF and ALSD, You'll lose some power, But spinning not winning. But in the case that your running a drag radial with shorter tire, with ALSD on, It will think your spinning the whole time, then it needs to be OFF.hiyt wrote:thanks alot that fixed it properly.
www.tundrageeks.com
-
bigsho1279
- Posts: 9
- Joined: Fri Nov 27, 2009 9:54 pm
Be patient guys. These things take time, especially since they haven't done a Toyota before. I highly doubt it will be ready by the end of the month. Give them time to make a complete, and well tested product. It will be worth it in the end.
The apostrophe does not mean "Look out, here comes an S"!
"I couldn't care less" means it is impossible to care less - "I could care less" just makes you look stupid.
"I couldn't care less" means it is impossible to care less - "I could care less" just makes you look stupid.
- Vas@Diablosport
- Posts: 1079
- Joined: Tue Apr 15, 2008 9:17 am
- mikel
- Posts: 58726
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Nothing soon...
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
-
tundra_drew
- Posts: 3
- Joined: Sun Nov 08, 2009 8:08 pm
This really has become a pointless thread. Diablo knows that they have the corner on a market that has moderate interest. They are however under no pressure to release, or even develop, this thing any time soon. It can come out in 6 months or 2 years and we will all still buy it. No one is competing with them, that we are aware of, so no rush...
-
chrimsonnight
- Posts: 2
- Joined: Fri Oct 16, 2009 9:29 pm