03 Cobra- locks up the dataviewer every time I try to connect. It's done this on two separate cars now. Says "connecting to tool..." and never gets any further.
02 Z06- MAF frequency PID is not there. Makes trying to dial this car in a pita as I have no idea where I am in the MAF table.
03 Cobra and 02 Z06 Issues
Moderator: mikel
-
mikel
- Posts: 58715
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: 03 Cobra and 02 Z06 Issues
U7142 is not currently supported by Dataviewer, use the CMR DAT program.
02 Z06....what revision on the tool?
Using DV or through the Predator?
02 Z06....what revision on the tool?
Using DV or through the Predator?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
RE: 03 Cobra and 02 Z06 Issues
Latest revision on the Z06. Doesn't appear on the predator or DV.
fwiw it didn't show up as an available PID on the dyno's computer using the autotap either though...
fwiw it didn't show up as an available PID on the dyno's computer using the autotap either though...
Modern Muscle, Va.
-
mikel
- Posts: 58715
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: 03 Cobra and 02 Z06 Issues
Hmmm...I see it in my 99 Z28....
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]