Tuner for 07 Toyota Tundra 5.7?

Post by **mikel** » Tue Apr 27, 2010 3:40 pm

not a problem.

blkellis · Post by **blkellis** » Thu May 13, 2010 8:16 pm

yippy for may, another new month of waiting/getting closer!!!

Leave3 · Post by **Leave3** » Fri May 14, 2010 12:42 pm

blkellis wrote:yippy for may, another new month of waiting/getting closer!!!

Ya well....my gut is tellimg me SEMA...knock on wood this happen THIS year. I assume the guys have compared the TRD S/C tune and the regular tune to see what has changed...right Mikel

programerordie · Post by **programerordie** » Wed May 19, 2010 7:31 pm

Is this dead?

Post by **mikel** » Thu May 20, 2010 9:19 am

programerordie wrote:Is this dead?

Not dead, just on hold for a bit...

Leave3 · Post by **Leave3** » Sat May 22, 2010 12:44 pm

mikel wrote:
programerordie wrote:Is this dead?
Not dead, just on hold for a bit...

.....................some info please.

lowriderman3 · Post by **lowriderman3** » Tue May 25, 2010 7:55 pm

mikel wrote:
programerordie wrote:Is this dead?
Not dead, just on hold for a bit...

Can you elaborate Mike so we can post on our Tundra forums please?

programerordie · Post by **programerordie** » Wed May 26, 2010 10:48 pm

mikel wrote:
programerordie wrote:Is this dead?
Not dead, just on hold for a bit...

On hold?

What for????????????????????????????

bigsho1279 · Post by **bigsho1279** » Fri May 28, 2010 6:35 pm

hey guys they can't break in to it. there is 8 computers in the truck 2 for the trans and 6 for the motor. i wish it was possible but if they do it will be a long time for this. these tundra computers are very smart. i promise u that the reason for them putting it on hold is because they r racking their brain tryin to break in to it. i believe in u guys but it will be a while.

bruskiboy84 · Post by **bruskiboy84** » Sun May 30, 2010 12:15 am

The last time i posted was june 26th, 2008 and i've been keeping up to date reading posts ever since. So here is dude number 1 hoping you guys can find a way to get it done. I'm sure there's a few guys on this forum that would be willing to follow a toyota shipping truck long enough for some OEM programming software to fall off(Wink,wink)

saa1210 · Post by **saa1210** » Wed Jun 02, 2010 12:41 pm

I would also like to suggest a programmer for the toyota Tundra. I have one and see more and more everyday. There's a large potential market of tundra owners that want to give a truck that's pretty badass a little more "oomph".

Post by **mikel** » Wed Jun 02, 2010 12:44 pm

bigsho1279 wrote:hey guys they can't break in to it. there is 8 computers in the truck 2 for the trans and 6 for the motor. i wish it was possible but if they do it will be a long time for this. these tundra computers are very smart. i promise u that the reason for them putting it on hold is because they r racking their brain tryin to break in to it. i believe in u guys but it will be a while.

.......we are in, just gotta figure out what the heck is going on in there!

It is becoming a major job, which we were expecting going into it.

If it were easy, I guess everyone would have a Tundra Tuner, right?

socal57chevy · Post by **socal57chevy** » Thu Jun 10, 2010 11:12 pm

WOOT!

bigsho1279 · Post by **bigsho1279** » Sun Jun 13, 2010 2:21 am

u go mike i know yall can man. let me say one thing the mass air flow meter is no regular stock meter. man this truck can do whatever u want it to and some. just need the tuner to do ur own mapping and shit. put it to u this way i run in my 07 TUNDRA 5.7. 12.9 sec in a 1/4. well 1000 foot now at 109 mph. stock motor.

Leave3 · Post by **Leave3** » Sun Jun 27, 2010 3:06 pm

mikel wrote:
bigsho1279 wrote:hey guys they can't break in to it. there is 8 computers in the truck 2 for the trans and 6 for the motor. i wish it was possible but if they do it will be a long time for this. these tundra computers are very smart. i promise u that the reason for them putting it on hold is because they r racking their brain tryin to break in to it. i believe in u guys but it will be a while.
.......we are in, just gotta figure out what the heck is going on in there!

It is becoming a major job, which we were expecting going into it.

If it were easy, I guess everyone would have a Tundra Tuner, right?

If you are in and "Actively working" then how can that be considered "ON HOLD"?