Whats coming down the Trinity pipeline?
Moderator: mikel
RE: Re: RE: Whats coming down the Trinity pipeline?
They claim that it can be used on a stock motor...Hmmmm?
- mikel
- Posts: 58698
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Re: RE: Whats coming down the Trinity pipeline?
It can, but it would be a waste, it was abviously developed for high rpm, cammed, stroker applications....
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
The FRPP Intake Manifold is really meant for a car with aftermarket cams at the minimum. It is worth maybe 5 HP on a stock motor with cold air intake.
If you were to do a top end with ported heads, frpp cams, intake manifold, and throttle body, then you would get over 425HP, making it a great normally aspirated alternative to a supercharger. This info was gathered from FRPP's internal testing.
If you were to do a top end with ported heads, frpp cams, intake manifold, and throttle body, then you would get over 425HP, making it a great normally aspirated alternative to a supercharger. This info was gathered from FRPP's internal testing.
Can we please get back on topic?
This topic of this thread has severely derailed..
I've always thought it would be a nice feature to be able to specify the max and min for the gauges. I'm anxiously waiting for this feature!
Another feature that would be really nice is if the wiper/slider gauges would show the peak value, something like in the attached picture.
I've always thought it would be a nice feature to be able to specify the max and min for the gauges. I'm anxiously waiting for this feature!
Another feature that would be really nice is if the wiper/slider gauges would show the peak value, something like in the attached picture.
- Attachments
-
- multi.bmp
- (17.93 KiB) Downloaded 524 times
- mikel
- Posts: 58698
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Can we please get back on topic?
Min/max is real close...I like the peak value deal, we'll have to look into that.mwt18 wrote:This topic of this thread has severely derailed..
I've always thought it would be a nice feature to be able to specify the max and min for the gauges. I'm anxiously waiting for this feature!
Another feature that would be really nice is if the wiper/slider gauges would show the peak value, something like in the attached picture.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
RE: Re: Can we please get back on topic?
Can you do the peak for horizontal sliders too? You could display the values at the far ends of the sliders. That would be cool.
The apostrophe does not mean "Look out, here comes an S"!
"I couldn't care less" means it is impossible to care less - "I could care less" just makes you look stupid.
"I couldn't care less" means it is impossible to care less - "I could care less" just makes you look stupid.
RE: Re: RE: Whats coming down the Trinity pipeline?
Any chance to add the speedometer settings to a 2010 GT500 or being able to tune a 2008 BMW Z4 M Coupe?
- mikel
- Posts: 58698
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Re: RE: Whats coming down the Trinity pipeline?
Have you looked for a different speed PID for the GT500?
BMW will be a little while...
BMW will be a little while...
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
RE: Re: RE: Whats coming down the Trinity pipeline?
Mike,
how do I do that? Please help.
Thanks
Randy
how do I do that? Please help.
Thanks
Randy
RE: Re: RE: Whats coming down the Trinity pipeline?
Hey mikel, how bout implementing another race option, like 60ft time? I know alot of us Jeep guys are always looking at our 60 ft times to see how well we hook up. Is that a possibility??
If you aint first, ur last...
- mikel
- Posts: 58698
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: RE: Re: RE: Whats coming down the Trinity pipeline?
I think a drop of wheelspin will throw that off quite a bit. Might work....kmitch80 wrote:Hey mikel, how bout implementing another race option, like 60ft time? I know alot of us Jeep guys are always looking at our 60 ft times to see how well we hook up. Is that a possibility??
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
RE: Re: RE: Re: RE: Whats coming down the Trinity pipeline?
worth a shot?
If you aint first, ur last...
Re: RE: Re: RE: Whats coming down the Trinity pipeline?
+1 for 60' timekmitch80 wrote:Hey mikel, how bout implementing another race option, like 60ft time?
When will 2011 Ford Ranger be available?
I've been looking for a capacity for the 2011 Ford Ranger. Over a year from the model release, and Trinity still does not support it. Any idea when this will be available?