2010 Shelby gt500

jimmyking · Post by **jimmyking** » Sat Jun 05, 2010 2:17 am

I got the Trinity for my 08 gt worked great, now I have a shelby gt500, I must thank my wonderfull wife of 18yrs for that. Anyway will the Trinity support the new car? Are there any new downloads/updates to install? Love the guage layouts and options. Thank you

Post by **mikel** » Mon Jun 07, 2010 10:57 am

Yes, Trinity works on all 07-10 GT500s....2011 coming soon!

jimmyking · Post by **jimmyking** » Mon Jun 07, 2010 11:21 pm

Thanks, Also I will not be doing any mods for a while, what can i get from the Trinity with the car in stock trim,HP,Tq? I will do a pulley,CAI,ect.. Are there tunes in there for these mods? AGAIN THANKS FOR YOUR HELP!!

Post by **mikel** » Tue Jun 08, 2010 9:58 am

Bone stock it will add about 30 rwhp-35-40 rwtq.

It has tunes for pullies and CAIs.

leftlane · Post by **leftlane** » Wed Jul 07, 2010 9:46 am

Can I monitor the rear axle temp? My GT 500 is getting too hot here in the German highways. Wat would be the correct temp to set an alarm, if possible?

Next question: The speed display is only upto 160 kph. Is it possible to display speeds higher than 250 kph?

Thanks a lot for any reply.

Post by **mikel** » Wed Jul 07, 2010 10:00 am

I dont know if the PCM monitors axle temp...

leftlane · Post by **leftlane** » Wed Jul 07, 2010 1:12 pm

Any idea how I could do that? What about the "Speed" question?

Post by **mikel** » Wed Jul 07, 2010 2:33 pm

The speedo will read however fast you are going...not sure on axle temp.

leftlane · Post by **leftlane** » Sun Jul 11, 2010 5:38 am

Hello mikel,

you are wrong with the speed. I am just back from the highway. Trinity stops at exactly 158.4 mph. If you are faster it will show 0.00 mph, as soon as you go slower it will come alive again and displays speeds upto that point. Second problem: distance travelled is not recorderd, shows 0.00 mls. I also put my gauges to Celcius, kph, etc. On the datareader everything is in american units, such as fahrenheit, miles, etc.

What did i do wrong or what is wrong with the Trinity??

Further questions: What parameters are different to the standard vehicle tune using your tune for 93 octane? I only modified speed limiter.

Is the quantity of fuel at wot different? what else? I would like to know exactly what has been changed using the Trinity.

Sorry, if my english is not perfect, but tecnical things are not that easy to understand for a German, especially shortcuts like wot, cai, etc.

Regards

leftlane

tuningss · Post by **tuningss** » Sun Jul 11, 2010 8:45 am

Modifications are fuel, spark, drive by wire, speed limiters, rev limiters, fan temps and alot more.

leftlane · Post by **leftlane** » Sun Jul 11, 2010 10:14 am

Thanks for your sunday reply and th einfos. However, I had to take out the speed limiter manually. Seems strange. Do you know how the Trinity will log the speeds above 158.4 mls?

If not, I hope somebody from diablo will reply.

2010 Shelby gt500

2010 Shelby gt500

RE: 2010 Shelby gt500