Wanted: Tuning for the Ecotec 2.2L & 2.4

bc3tech2 · Post by **bc3tech2** » Wed Jan 24, 2007 11:59 pm

Procharged Ion QC2 here, e16a ECM.

Tuning please!

Post by **mikel** » Thu Jan 25, 2007 12:24 am

bc3tech2 wrote:Procharged Ion QC2 here, e16a ECM.

Tuning please!

Interesting......keep yellin guys!

ionjentzsch · Post by **ionjentzsch** » Thu Jan 25, 2007 1:43 am

Please help us! You will not regret it. Thank you.

Turbo kit on its way! Bc3tech, myself, and others would jump at this!

slowion2 · Post by **slowion2** » Thu Jan 25, 2007 1:03 pm

thanks for the kind words SpeedMotion

bc3 - fancy seeing you here haha

mikel - I'm glad to see you guys so receptive to us. a lot of us, especially the e16a guys like myself, have been hoping for tuning for a while now. REDFOCZ actually brought you guys to my attention, and I've been meaning to get on here and post up. If you are offering a suite that's basically comparable to HP Tuners and SCT, then I think you will have a lot of inerest shown. I for one have a secone engine sitting in my parts closet waiting to be built with forged internals, basically because I am not going to spend the money until I know I can tune for boost (looking at a procharger c1 or c2, or maybe a t3/to4e). Even with my current setup though I could benefit from making a few adjustments. Here's a quick list of most of my build: http://www.sixthsphere.com/forum2/garag ... cle&CID=62

I hope to see more info on this as time goes on, maybe a trip over to your shop is in order at some point

Post by **mikel** » Thu Jan 25, 2007 1:10 pm

slowion2 wrote:thanks for the kind words SpeedMotion

bc3 - fancy seeing you here haha

mikel - I'm glad to see you guys so receptive to us. a lot of us, especially the e16a guys like myself, have been hoping for tuning for a while now. REDFOCZ actually brought you guys to my attention, and I've been meaning to get on here and post up. If you are offering a suite that's basically comparable to HP Tuners and SCT, then I think you will have a lot of inerest shown. I for one have a secone engine sitting in my parts closet waiting to be built with forged internals, basically because I am not going to spend the money until I know I can tune for boost (looking at a procharger c1 or c2, or maybe a t3/to4e). Even with my current setup though I could benefit from making a few adjustments. Here's a quick list of most of my build: http://www.sixthsphere.com/forum2/garag ... cle&CID=62

I hope to see more info on this as time goes on, maybe a trip over to your shop is in order at some point

Are you in W. Palm? We may need a Beta test vehicle in the future...I'll keep you in mind if you are local.

Thanks

slowion2 · Post by **slowion2** » Thu Jan 25, 2007 1:12 pm

I'm in Orlando, but I can travel down there if need be. REDFOCZ is as also. I might be able to get someone in your immediate area if need be though.

Montecarloman · Post by **Montecarloman** » Thu Jan 25, 2007 9:49 pm

We 2.2's need tuning, sweet merciful crap !!!

davekicksyourass · Post by **davekicksyourass** » Sun Jan 28, 2007 11:36 pm

I would be definitely be interested too. I've been looking for a tuning solution, so if you guys make a programmer me and I'm sure many others will buy it. I'm in orlando also and would also be willing to help with testing. I have a 2.4 automatic with gm header, wide open muffler, short ram intake, and 3 in down pipe with highflow cat. Let me know if you need a donor vehicle.

slowion2 · Post by **slowion2** » Mon Jan 29, 2007 1:18 pm

davekicksyourass wrote:I would be definitely be interested too. I've been looking for a tuning solution, so if you guys make a programmer me and I'm sure many others will buy it. I'm in orlando also and would also be willing to help with testing. I have a 2.4 automatic with gm header, wide open muffler, short ram intake, and 3 in down pipe with highflow cat. Let me know if you need a donor vehicle.

dave you have an ion or a cobalt? I haven't seen anyone running around with that lately.

good to see more people interested.

REDFOCZ · Post by **REDFOCZ** » Mon Jan 29, 2007 1:48 pm

Vinny he has a cobalt

bc3tech · Post by **bc3tech** » Tue Jan 30, 2007 3:49 pm

davekicksyourass wrote:I would be definitely be interested too. I've been looking for a tuning solution, so if you guys make a programmer me and I'm sure many others will buy it. I'm in orlando also and would also be willing to help with testing. I have a 2.4 automatic with gm header, wide open muffler, short ram intake, and 3 in down pipe with highflow cat. Let me know if you need a donor vehicle.

2.4s have tuning yo.....

and on the lines of what slowion's posted, here is a link to my mods & a few pix of the car
http://ionforums.net/garage.php?mode=view_vehicle&CID=3

upongame · Post by **upongame** » Tue Jan 30, 2007 5:18 pm

get er done HHR needs that tuning

Post by **mikel** » Tue Jan 30, 2007 8:42 pm

One Kick Ass Quad Coupe
16.317s @ 85.30mph
188.28whp / 175.03wtq - SMP Stage 2 - 10psi [flakey tune! help me!!]

LOL, I love that sig

bc3tech · Post by **bc3tech** » Wed Jan 31, 2007 10:13 am

chya man... my AFR is all over the place w/ the current DFMU application i'm using... i really need some precise tuning and i could likely squeeze another 30whp outta that!

IonNinja · Post by **IonNinja** » Thu Feb 01, 2007 11:59 pm

slowion2 wrote:I'm in Orlando, but I can travel down there if need be. REDFOCZ is as also. I might be able to get someone in your immediate area if need be though.

do it for the Ions! I would love to get a nitrous tune...

with the diablo you can carry multiple tunes right? so I could have an N/A tune and a nitrous tune...

man we need something, I want some more all the time power and I don't know what else to do other than tear into the motor.

Its either this or SCT but I think this might be better as it can encourage me to read up on tuning and start working on my own car.

Wanted: Tuning for the Ecotec 2.2L & 2.4

Wanted: Tuning for the Ecotec 2.2L & 2.4

Procharged 2.2L

Re: Procharged 2.2L