2010 Challenger SRT8 6 Speed and u7135 Tuner Problems!!

[willtransco]

Went out to hook up the Tuner to Car..I had been running it on a 2008 Charger R/T and all was fine.. NOTE..I did the latest update crom and then get to Car..boot up and I get the following Message

Predator u7135 does not support Calid:68004309AD. Tool update might be required.

Car is a 2010 Challenger SRT8 6 Speed

u7135-9r12 was installed..I installed u7135-9r27.crom
and still got same message..so I reinstalled 9r12

Tuner has always worked well till now..
Need some Info here..

Thanks

[Mike_Levy]

That CalID isn't supported yet. Gonna have to wait until they get the code and add it in.

[willtransco]

Any idea when... Tuner is a papeweight at tha moment

[willtransco]

What I need is a Trade in..and get a Trinity!!! Whoo Hoo!!

[Mike_Levy]

They have the same tunes and the same support. If the Predator doesn't work with your Cal, neither will the Trinity.

[mikel]

Keep an eye out for 9r28.

[Gooichimotors]

When is 9r28 due to be out? Ive got a 2010 srt8 challenger with the same exact problem. I did a ton of work to my car this past weekend and had to wait to get my tuner in the mail. Now i have it and I can't even use it! Not to mention when this 9r28 thing comes out ive got to figure out how the heck to update my predator... Seems like a lot of crap to do for something that should be plug n play! Please help!!

[Mike_Levy]

Can't be plug n play when Chrysler uses a bunch of different Cals every year, and each one needs to be added in as they're released and decoded.

[Gooichimotors]

That's crazy! Is that why some of the 2010 srt8 challengers out there can run predators, and mine and willtransco's can't? They have different cals for the same yr/model??!!

I just want to unleash the fury, hopefully they can get 9r28 out soon!

[Mike_Levy]

Yep, thats why. You can have the exact same year, make and model and there could be 6 or 7 different CalIDs.

[willtransco]

Where is 92r28???

[willtransco]

Guess I am outta luck..Installed the v.9r27 crom..Tool reports :

Incompatable Hardware.(No serial flash found)
Contact Tech Support
(561-908-0040 x1
www.DiabloSport.com

[willtransco]

That CalID isn't supported yet. Gonna have to wait until they get the code and add it in.

OK when that comes out..how am I going to get the crom on the tool???

When I load 9r27 now I get errors!

[muskegoil]

On top off this page click on support and then tech support..At the bottom you will find all the pdf information you will need too update your crom and etc,,,

[mikel]

You need 9r27l.