What options to change for no shift pressure change?

[beefcake.]

I have a valve body that flows good and I don't want to increase shift pressure.

When loading the 85 tune, i found lots of trans paramaters. The only thing I changed was the first one, the universal shift pressure. I took it all the way to 0.

Will this keep all shift pressures normal, or do i need to adjust every setting in the predator trans pressures

[mikel]

That will change the pressures across the board.

[beefcake.]

That will change the pressures across the board.

so if i set that to 0, i dont have to worry about changing any of the other parameters if I don't want an increase in line pressure?

[mikel]

0 is actually no change from our tune, which has some pressure added, so you may want to play with it to get it where you like it.

[beefcake.]

mine shifts hard. the valve body works real good all by itself. my tranny guy said to "not' add pressure. trying to make sure thats the way i got it!

thanks

[mikel]

maybe start with it set to -3 or 4.