boost gauge does not work after updating to the 1r08 crom.

danno530 · Post by **danno530** » Sun Mar 06, 2011 11:36 pm

I have a 2003 Pt Cruiser Gt. boost gauge worked fine on the trinity before i updated to the 1r08 crom now it stays at 0 boost so i updated it agiin and it still not working. anyone have any ideas? please help.

jimb · Post by **jimb** » Mon Mar 07, 2011 9:58 am

Can you try monitoring MAP and BARO. What do they show?

danno530 · Post by **danno530** » Mon Mar 07, 2011 7:41 pm

Yes they work. baro 96.60 map reads around 32.80 .

jimb · Post by **jimb** » Tue Mar 08, 2011 1:05 pm

With BARO=96.6 kPa and MAP=32.8 kPa; The Boost Synth PID will be 0.

Boost only shows > 0 when MAP > BARO.

danno530 · Post by **danno530** » Tue Mar 08, 2011 6:26 pm

yes that was at idle map changes a lot when driving. just don not understand why boost synth worked fine before and when i updated it quit. i also tried making a new gauge layout with a synth boost gauge and still not working all the other gauges seen to work fine.

danno530 · Post by **danno530** » Tue Mar 08, 2011 7:19 pm

map goes >baro just went and checked

Post by **mikel** » Tue Mar 08, 2011 7:28 pm

can you log that and post it?

danno530 · Post by **danno530** » Wed Mar 09, 2011 10:33 pm

hope i did this right

jimb · Post by **jimb** » Thu Mar 10, 2011 10:05 am

You did it right. Your log is showing BARO and "READ MAP kpa" non-standard PIDs which were used to calculate Boost for early SRT4 ECUs. In the more recent DCX Gas 1R08, we switched to using standard PID's which don't work on early CalIDs. It's something that needs to get fixed in next DCX GAS release.

danno530 · Post by **danno530** » Thu Mar 10, 2011 6:09 pm

so i need to wait for a update to get my boost gauge working?

BoostedSRT4 · Post by **BoostedSRT4** » Sun Mar 13, 2011 4:21 am

Mine isn't showing up at all and I tried looking in every PID for it and still no luck.

Flakdodger · Post by **Flakdodger** » Tue Mar 15, 2011 1:17 am

Can I go back to old rom until boost monitor issue is resolved for the PT GT's?

Post by **mikel** » Thu Mar 17, 2011 3:52 pm

fix is here:

danno530 · Post by **danno530** » Thu Mar 17, 2011 9:38 pm

Thank you Mikel boost gauge is working now !!!!!

Post by **mikel** » Fri Mar 18, 2011 9:26 am

Thanks for the feedback.

boost gauge does not work after updating to the 1r08 crom.

boost gauge does not work after updating to the 1r08 crom.

RE: boost gauge does not work after updating to the 1r08 cro

RE: boost gauge does not work after updating to the 1r08 cro

RE: boost gauge does not work after updating to the 1r08 cro

RE: boost gauge does not work after updating to the 1r08 cro

RE: boost gauge does not work after updating to the 1r08 cro

RE: boost gauge does not work after updating to the 1r08 cro