2011 6.6 Harness install

PowerPuck/Extreme PowerPuck Support

Moderator: mikel

Post Reply
Troponin
Posts: 2
Joined: Thu Oct 06, 2011 11:40 am

2011 6.6 Harness install

Post by Troponin »

So I get under the hood and I believe I found the fuel sensor where I need to install the power puck to. The problem is, it's in this bracket and I cannot get my hands in to to release the harness. Do I need to remove the bracket or is there a trick to getting this? The instructions don't mention the bracket at all, so I want to be sure.

Lastly, cars and trucks used to have several places in the firewalls to run extra wires etc. I checked and it appears there are none on this truck. Has anyone found that it's required to drill?
frankl

RE: 2011 6.6 Harness install

Post by frankl »

no trick to it that I know of, you should be able to just unsnap the plug. Here is a link to the instructions.

http://diablosport.com/beta/forumfiles/ ... ax_206.pdf
Post Reply

Return to “PowerPuck/Extreme PowerPuck”