2009 SRT8 - Calibration err message after dealership flashed

Predator support for Dodge gas vehicles

Moderator: mikel

User avatar
fightenfire
Posts: 13
Joined: Sat Dec 31, 2011 4:42 pm

2009 SRT8 - Calibration err message after dealership flashed

Post by fightenfire »

I recently went to the dealership to have a few updates done on the TCM/PCM...I had the predator 7135u installed and working perfectly prior to going to the dealership, re-installed stock tune and got the car back yesterday with the new updates done to the above components... i went to re-install the performance tune today and received an error saying that my calibration of 68004302AG was not supported by the 7135u and that it would have to be downgraded to the 68004302AD prior to install continuing.

Has anyone had this problem? What is the resolution? I really want this tune back on but don't want to screw anything up.

I have a 09 Challenger SRT8 running the 9r29 7135U
User avatar
Mike_Levy
Posts: 6715
Joined: Fri Oct 26, 2007 8:11 pm
Location: Between Orlando and Tampa

RE: 2009 SRT8 - Calibration err message after dealership fla

Post by Mike_Levy »

The problem is that they haven't added the new CalID to the tunes, so it won't work. Only option at this point is to downgrade.
User avatar
fightenfire
Posts: 13
Joined: Sat Dec 31, 2011 4:42 pm

RE: 2009 SRT8 - Calibration err message after dealership fla

Post by fightenfire »

will that screw up what the dealership just updated?
2012 Chevy Silverado Southern Comfort
Volant Cold Air, Magnaflow exhaust, Amsoil Synthetics, inTune with 87 octane tune
broadfca
Posts: 368
Joined: Mon May 25, 2009 9:06 am

RE: 2009 SRT8 - Calibration err message after dealership fla

Post by broadfca »

I had this same thing happen to me. There was no noticeable performance improvement with the dealership update, so I just went ahead and downgraded and put the Diablo tune back in my car. IMO these cars run like shit with a stock tune compared to with a Diablo tune. You won't screw anything up, your car will just run like it did before.
"El Magnifico" 2009 Challenger SRT8 AutoStick, Corsa Sport Catback Exhaust, Trinity 91 Modified Tune, 180 T-stat, Moroso Catch Can, DMH Electronic Cut Outs, ProTorque Billet Stator 3200 RPM High Stall Torque Converter, K&N, BFG 295/40/20w Rear Tires
User avatar
fightenfire
Posts: 13
Joined: Sat Dec 31, 2011 4:42 pm

Re: RE: 2009 SRT8 - Calibration err message after dealership

Post by fightenfire »

broadfca wrote:I had this same thing happen to me. There was no noticeable performance improvement with the dealership update, so I just went ahead and downgraded and put the Diablo tune back in my car. IMO these cars run like shit with a stock tune compared to with a Diablo tune. You won't screw anything up, your car will just run like it did before.
whats up from the other site! lol... i will ask the question here as well. Will downgrading have any baring of what the dealersihp updated since the updates were specific to the TCM and PCM tsbs that were out for the shifting issues and driveability issues? my shifting issues have definitely been resolved from this flash to the PCM and TCM...
leeindy
Posts: 170
Joined: Sun Jul 04, 2010 6:46 pm

RE: Re: RE: 2009 SRT8 - Calibration err message after dealer

Post by leeindy »

did you have the issues with the diablo tune?
07 Ram Hemi 5.7 quad cab 4x4 big horn. 3.92 gears, Flowmaster exhaust and more coming.
User avatar
fightenfire
Posts: 13
Joined: Sat Dec 31, 2011 4:42 pm

Re: RE: Re: RE: 2009 SRT8 - Calibration err message after de

Post by fightenfire »

leeindy wrote:did you have the issues with the diablo tune?
no drivability issues, just shifting issues...which those have been resolved with the flashes they did
leeindy
Posts: 170
Joined: Sun Jul 04, 2010 6:46 pm

RE: Re: RE: Re: RE: 2009 SRT8 - Calibration err message afte

Post by leeindy »

sounds to me like the calid needs updated on diablos end.
07 Ram Hemi 5.7 quad cab 4x4 big horn. 3.92 gears, Flowmaster exhaust and more coming.
User avatar
fightenfire
Posts: 13
Joined: Sat Dec 31, 2011 4:42 pm

Re: RE: Re: RE: Re: RE: 2009 SRT8 - Calibration err message

Post by fightenfire »

leeindy wrote:sounds to me like the calid needs updated on diablos end.
hopefully one of the diablo guys will chime in after the holidays with a possible solution.. i really don't want to reflash the PCM with an older version if it will go back to its old ways :/
brandy16
Posts: 712
Joined: Thu Sep 11, 2008 9:06 pm

Re: RE: Re: RE: 2009 SRT8 - Calibration err message after de

Post by brandy16 »

fightenfire wrote:
leeindy wrote:did you have the issues with the diablo tune?
no drivability issues, just shifting issues...which those have been resolved with the flashes they did
I would wait for Diablo to update the calid. If you go back you are going to have the same shift issues as you had before the dealer flash.
User avatar
fightenfire
Posts: 13
Joined: Sat Dec 31, 2011 4:42 pm

Re: RE: Re: RE: 2009 SRT8 - Calibration err message after de

Post by fightenfire »

brandy16 wrote:
fightenfire wrote:
leeindy wrote:did you have the issues with the diablo tune?
no drivability issues, just shifting issues...which those have been resolved with the flashes they did
I would wait for Diablo to update the calid. If you go back you are going to have the same shift issues as you had before the dealer flash.
well dang... any idea of how long it normally takes for the CalID's to be updated?
User avatar
mikel
Posts: 58694
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

RE: Re: RE: Re: RE: 2009 SRT8 - Calibration err message afte

Post by mikel »

let it downgrade...
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
leeindy
Posts: 170
Joined: Sun Jul 04, 2010 6:46 pm

RE: Re: RE: Re: RE: 2009 SRT8 - Calibration err message afte

Post by leeindy »

wont that give him the shifting issues again?
07 Ram Hemi 5.7 quad cab 4x4 big horn. 3.92 gears, Flowmaster exhaust and more coming.
User avatar
fightenfire
Posts: 13
Joined: Sat Dec 31, 2011 4:42 pm

RE: Re: RE: Re: RE: 2009 SRT8 - Calibration err message afte

Post by fightenfire »

same as leeindy's response...i also have a concern of letting it downgrade and have to go back to the dealership for something else and they noticed that they most up to date calid is no more...
2012 Chevy Silverado Southern Comfort
Volant Cold Air, Magnaflow exhaust, Amsoil Synthetics, inTune with 87 octane tune
User avatar
mikel
Posts: 58694
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: RE: Re: RE: Re: RE: 2009 SRT8 - Calibration err message

Post by mikel »

fightenfire wrote:same as leeindy's response...i also have a concern of letting it downgrade and have to go back to the dealership for something else and they noticed that they most up to date calid is no more...
there are thousands of other users who have done this same downgrade, and there has never, ever, been a dealer issue regarding a Predator/Trinty ;)
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “Predator Dodge Gas”