2004 Dodge Ram 5.7 Hemi

Post by **mikel** » Wed Jan 04, 2012 6:55 pm

It would be part of the same bug that they are fixing right now.

xtreme · Post by **xtreme** » Fri Jan 06, 2012 10:33 pm

Still not working on this truck, even after the update. Wait for another update?

Nolimitzr1 · Post by **Nolimitzr1** » Fri Jan 06, 2012 11:24 pm

Worked for me, had to get dealer flash to bring it up to par.

xtreme · Post by **xtreme** » Tue Jan 10, 2012 11:51 am

Nolimitzr1 wrote:Worked for me, had to get dealer flash to bring it up to par.

Was this on a 2004 Hemi Truck?

If this is the case why cant we do a cal update like before?

At the point of ordering a Predator in order to tune this truck.

Are we still waiting for another update, Cal ID is 56029161AF

Post by **mikel** » Tue Jan 10, 2012 12:01 pm

I have a fix for the Rams not doing cal updates or only tuning the TCM...

xtreme · Post by **xtreme** » Tue Jan 10, 2012 12:25 pm

mikel wrote:I have a fix for the Rams not doing cal updates or only tuning the TCM...

When Can I get this fix?

Post by **mikel** » Tue Jan 10, 2012 12:36 pm

emailed it to you...

xtreme · Post by **xtreme** » Tue Jan 10, 2012 6:02 pm

Working correctly now thanks Mike.

Post by **mikel** » Tue Jan 10, 2012 6:24 pm

awesome

Nolimitzr1 · Post by **Nolimitzr1** » Tue Jan 10, 2012 6:54 pm

Mike if this is a different fix can you mail this one to me too for a friend? Nolimitzr1@gmail

Post by **mikel** » Tue Jan 10, 2012 7:01 pm

sent...

john74 · Post by **john74** » Tue Jan 10, 2012 7:08 pm

Hi Mike its John again. I retuned that Intune the other day after Jon from tech support said my unit was faulty. Well i got another Intune today. Can you send me the 2004 dodge ram update to [email protected]. thanks

Post by **mikel** » Tue Jan 10, 2012 7:16 pm

sent.

john74 · Post by **john74** » Tue Jan 10, 2012 9:03 pm

Everything updated okay. Trying to install plug everything in. No vehicle detected. The OBDII plug is fine in my truck since i used a scanning tool and it worked no problem. This is the same issue i had with the last Intune i sent back because Jon from tech beleived it was faulty. I checked all the pins and everything look fine. Not sure what to do now. I am getting very frusterated.

john74 · Post by **john74** » Tue Jan 10, 2012 9:08 pm

Would the truck needing a PCM update cause the Intune not to see the truck?