Diablo Extreme Power Puck Install, truck overheats, no power

PowerPuck/Extreme PowerPuck Support

Moderator: mikel

Post Reply
dmax39
Posts: 2
Joined: Tue Jan 24, 2012 10:31 pm

Diablo Extreme Power Puck Install, truck overheats, no power

Post by dmax39 »

Just installed Extreme Power Puck on an 2007 LBZ and once the key is turned on the temp gauge goes to max and overheating message appears on the dash. Truck starts but runs rough, won't go over 1200 RPM's.


2007 GMC 2500HD 6.6L LBZ
dmax39
Posts: 2
Joined: Tue Jan 24, 2012 10:31 pm

RE: Diablo Extreme Power Puck Install, truck overheats, no p

Post by dmax39 »

Truck is throwing code P0652
User avatar
Ill_Born_SS
Posts: 962
Joined: Fri Aug 08, 2008 4:48 pm

RE: Diablo Extreme Power Puck Install, truck overheats, no p

Post by Ill_Born_SS »

http://www.aboutautomobile.com/TSB/2007 ... cal+Wiring

#4 is likely but the other ones listed can also do it!

could be a loose connector or maybe moisture/corrosion, but it is a known problem.... may have disturbed something with your install.
Only one thing to say about my "Diablew" Tune!
" Just Friggin Wicked"
Now with TCM support...
User avatar
mikel
Posts: 58801
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

RE: Diablo Extreme Power Puck Install, truck overheats, no p

Post by mikel »

yeah, id check for a loose or backwards connector os something, or maybe a connector that didnt get plugged back in?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “PowerPuck/Extreme PowerPuck”