*My truck has the u7192. It is a 2007 silverado classic, 4.8. My tuner is v9r04.
I have had the tuner installed and running the 93 octane tune for almost 6 months now. Recently started recieving 3 engine codes, all relating to my t.a.c. module (throttle acutator control). I reinstalled my factory tune, cleared the codes and unplugged my battery for 3 hours. This got rid of the codes and it is running fine now. I drove it on a 100 mile road trip and it worked flawlessly.Tried to reinstall the 93 tune and it just brought the codes right back up. I do have a full 3" exhaust, underdrive pulleys, intake, 3" cutout, and 3.73. Not sure if any of this stuff will affect it. Any ideas?
2007 silverado classic 4.8 - throwing multiple codes.
-
hookemhorns8504
- Posts: 2
- Joined: Fri Oct 14, 2011 5:27 pm
-
hookemhorns8504
- Posts: 2
- Joined: Fri Oct 14, 2011 5:27 pm
RE: 2007 silverado classic 4.8 - throwing multiple codes.
It was also causing my truck to go into "reduced engine power mode" which makes my throttle completly useless...
-
Screaminxl
- Posts: 10
- Joined: Tue Aug 16, 2011 9:52 am
RE: 2007 silverado classic 4.8 - throwing multiple codes.
I would start by installing the original tune and updating the predator. 9r04 is from 10-15-08. The latest is 9r13 from 8-11-10.
- mikel
- Posts: 58715
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: RE: 2007 silverado classic 4.8 - throwing multiple codes
+1Screaminxl wrote:I would start by installing the original tune and updating the predator. 9r04 is from 10-15-08. The latest is 9r13 from 8-11-10.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]