intune.exe issues

PhatBasturd · Post by **PhatBasturd** » Thu Apr 12, 2012 4:43 pm

NO JOY. Still does not work - same symptoms.

Post by **mikel** » Fri Apr 13, 2012 3:02 pm

please open the intune drive and post the info.xml file here, and also tell me if there is an .itfg file on the intune drive, and if there is, delete it

PhatBasturd · Post by **PhatBasturd** » Fri Apr 13, 2012 3:35 pm

Yes there is a Group_Update.itfg

Here is the xml:

<?xml version="1.0"?>
-<tool_info> <main svn="4210" sw_rev="1r01h" full_version="InTune-1r01h 03/29/2012 12:07:10 PM"/> <registration status="0" sn="CIDKXE2-1"/> <restore bc="0" vin="" id="0"/> <db pid="1r01a" tune="1r01c" mfr="GM"/> <db pid="1r01a" tune="1r01a" mfr="DCX"/> <db pid="1r01a" tune="1r01a" mfr="FORD"/> <system_db vin="1r01a" info="1r01a" dtc="1r01a"/> <license tuned="0" avail="1"/> <updates count="2"/> </tool_info>

PhatBasturd · Post by **PhatBasturd** » Fri Apr 13, 2012 3:42 pm

I deleted the itfg file and rebooted the inTune.

It is currently writing to the inTune.

Post by **mikel** » Fri Apr 13, 2012 3:50 pm

sweet, that should be the fix.

ptperformance · Post by **ptperformance** » Thu Apr 19, 2012 7:34 pm

Wow what a pain to get sorted. I had one of my InTunes do the same thing and I had to drop both files into the "intune" folder. After that, updates and everything is running smooth.

Thanks guys!

autox · Post by **autox** » Wed May 23, 2012 8:13 pm

Same thing here... UAC stuff is off.. and has always been off!

autox · Post by **autox** » Wed May 23, 2012 8:22 pm

I cannot update it because it needs to be registered. or so that says on the display

but i can't registered it because it can't be detected!

Post by **mikel** » Thu May 24, 2012 9:33 am

autox wrote:I cannot update it because it needs to be registered. or so that says on the display

but i can't registered it because it can't be detected!

if you post the actual info.xml file, I can both get you the needed cal update, and make you a registration file....

prplhze · Post by **prplhze** » Thu May 24, 2012 2:15 pm

[quote="mikel"][quote="autox"]I cannot update it because it needs to be registered. or so that says on the display

but i canSame here please...
inTune worked fine on update 1r01h now wont work at all with 1r01i. And I have never been able to register. I never get a PIN code sent to my e-mail after filling out the reg form.

<?xml version="1.0"?>
-<tool_info> <main svn="4599" sw_rev="1r01i" full_version="InTune-1r01i 05/15/2012 10:38:04 AM"/> <registration status="0" sn="CIE8B96-1"/> <restore bc="0" vin="2B3CJ7DW9AH199744" id="0"/> <db pid="1r01a" tune="1r01e" mfr="GM"/> <db pid="1r01a" tune="1r01b" mfr="DCX"/> <db pid="1r01a" tune="1r01b" mfr="FORD"/> <system_db vin="1r01a" info="1r01a" dtc="1r01a"/> <license tuned="0" avail="1"/> <unsupported vin="2B3CJ7DW9AH199744" oem="DCX" calid="68004309AD"/> <updates count="2"/> </tool_info>

JonDiablosport · Post by **JonDiablosport** » Thu May 24, 2012 2:24 pm

the registration screen has been completely revamped with 1r01i. even before it was released actually. and you are posting the contents of the info file not the actual info file. Please choose post reply and attach the info.xml file to the post. thanks;

or email it to [email protected]

prplhze · Post by **prplhze** » Thu May 24, 2012 3:11 pm

Hope this helps...
When I try to load a tune, inTune says "Exit Called".

prplhze · Post by **prplhze** » Thu May 24, 2012 9:54 pm

If I try to load another tune it also reads "vehicle has been tuned previously by another DiabloSport product". This is the only tuner I have.
Can I get cal update and registration file??

prplhze · Post by **prplhze** » Thu May 24, 2012 9:55 pm

Also, logs folder and tunes folder are empty.

Post by **mikel** » Fri May 25, 2012 8:50 am

what vehicle do you have?