05 duramax throwing code

05dmax · Post by **05dmax** » Sat Nov 26, 2011 10:34 am

I have the trinity programer and when I put it on my 05 Max the 100 horse tune.
When I get on it full throttle it throws a "p0700" is there any solution to this?

05dmax · Post by **05dmax** » Sat Nov 26, 2011 10:35 am

And also it puts it on like a limp mode

yfzgoody · Post by **yfzgoody** » Thu Sep 27, 2012 9:46 pm

P0700 is a tranny code. Predator cant read the TCM codes. The P0700 is a code the TCM sends to the ECM to tell it to throw the code and check engine light. You limped your tranny. Have to take it to a shop or somewhere that can pull codes off the TCM to figure out what caused it to limp.

yfzgoody · Post by **yfzgoody** » Thu Sep 27, 2012 9:48 pm

With the Allison it is also very wise to take it easy on your tranny for a couple hundred miles after you go "UP" on your tune. If you run on a tow tune and swap to a max hp you will probably limp it. The allison trans "relearns" the extra hp you are throwing to it. changing pressures and other things.

05 duramax throwing code

05 duramax throwing code

RE: 05 duramax throwing code

Re: 05 duramax throwing code

Re: 05 duramax throwing code