Transmission Temp

Post any questions or comments about your Trinity for your GM car or gas truck here.

Moderators: 06MonteSS, mikel

Post Reply
dukercan
Posts: 3
Joined: Wed Oct 24, 2012 2:32 pm

Transmission Temp

Post by dukercan »

I have included a guage for Trans temp on my T1000 monitor but its stays at 0C. 2010 Tahoe 5.3. Any suggestions? Thanks
User avatar
Mike_Levy
Posts: 6715
Joined: Fri Oct 26, 2007 8:11 pm
Location: Between Orlando and Tampa

Re: Transmission Temp

Post by Mike_Levy »

Don't you have Trans temp in your information center in the dash? I think thats the only way to see it. The PIDs in the Trinity don't seem to be able to see it on the GMT900's.
dukercan
Posts: 3
Joined: Wed Oct 24, 2012 2:32 pm

Re: Transmission Temp

Post by dukercan »

It is on the IC... but I wanted to have Tran temp/Oil temp/coolant temp and MPH on the T1000 as I drive with the trailer attached. It is a good monitor of what is happening under the hood when trailering, along with MPH since the speedo is KPH... and I am driving in the US...!
User avatar
mikel
Posts: 58714
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Transmission Temp

Post by mikel »

cant get PIDs from the PCM and TCM, so we only do PCM....
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “Trinity GM Gas”