Trinity question. Analog inputs.

electricmarquis · Post by **electricmarquis** » Thu Aug 01, 2013 3:47 pm

Does the Trinity need to have live PC connection like the Intune in order to log analog inputs or can it log the inputs by itself? :drivingbad:

Post by **mikel** » Fri Aug 02, 2013 9:30 am

trinity can do it by itself....

electricmarquis · Post by **electricmarquis** » Fri Aug 02, 2013 11:31 am

Dang. I should have bought a Trinity. Is there a trade up program to go from intune to trinity or do I sell and buy again?

electricmarquis · Post by **electricmarquis** » Mon Aug 05, 2013 6:10 pm

I guess that means no. I went ahead and bought a Trinity and will sell the Intune.

Post by **mikel** » Tue Aug 06, 2013 9:44 am

Sorry, no

electricmarquis · Post by **electricmarquis** » Thu Aug 08, 2013 4:02 pm

I have no idea why I spent 3 weeks trying to get analog sensors and scaling right on my intune. I bought the trinity and 1st try its working and with in 1% accuracy.

What would be nice is the ability to set a non linear sensor via multiple points, maybe in future.....

Post by **mikel** » Thu Aug 08, 2013 4:23 pm

non linear gets tricky....better left for serial inputs

electricmarquis · Post by **electricmarquis** » Fri Aug 09, 2013 11:56 am

Whats the other pin-out connector next to the OBDII port on the trinity?

gizmodo · Post by **gizmodo** » Fri Aug 09, 2013 12:21 pm

mikel wrote:non linear gets tricky....better left for serial inputs

Has this functionality been added to the Trinity? If so I have been asleep at the wheel, and that is good news.

Post by **mikel** » Fri Aug 09, 2013 1:47 pm

electricmarquis wrote:Whats the other pin-out connector next to the OBDII port on the trinity?

serial connector for serial inputs...

gizmodo wrote:
mikel wrote:non linear gets tricky....better left for serial inputs
Has this functionality been added to the Trinity? If so I have been asleep at the wheel, and that is good news.

No...but we have been working with Snow to allow them to control their devices through the serial port and the touch screen.
http://www.snowperformance.net/comp-one-diesel.html

Thats going to open some doors

electricmarquis · Post by **electricmarquis** » Fri Aug 09, 2013 2:04 pm

WOW! Meth injection built into forced induction tunes and dependent on what ever variable you set.... this would be fantastic! I see a larger meth pulse due to knock, iat temps, etc....

gizmodo · Post by **gizmodo** » Wed Aug 21, 2013 2:24 pm

mikel wrote:
electricmarquis wrote:Whats the other pin-out connector next to the OBDII port on the trinity?
serial connector for serial inputs...

gizmodo wrote:
mikel wrote:non linear gets tricky....better left for serial inputs
Has this functionality been added to the Trinity? If so I have been asleep at the wheel, and that is good news.
No...but we have been working with Snow to allow them to control their devices through the serial port and the touch screen.
http://www.snowperformance.net/comp-one-diesel.html

Thats going to open some doors

What do I need to do to get Zeitronix output support for the Trinity? Come on Mike, let me at the code!

Trinity question. Analog inputs.

Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.

Re: Trinity question. Analog inputs.