is this normal when updating?

vig · Post by **vig** » Thu Jul 10, 2014 10:22 pm

I had the intune connected to the comp to get datalogs off, so i figured i'll update the intune. After a while it wrote the 2 files, and verified them. As soon as it finished verifying, i got this message: "the current firmware revision (1r03x) cannot be replaced by the firmware package within Group_Update_o" Is this ok/normal, and if it is, will i have problems updating from here on out, with the next revisions? Thanks!!

vig · Post by **vig** » Fri Jul 11, 2014 10:40 am

PS firmware info looks like this:

application: 1r03x
DCX Tune Db: 1r01d(*)
FORD Tune Db: 1r01n(*)
GM Tune Db: 1r02a(ok)
DCX PID Db: 1r01b(*)
FORD PID Db: 1r01b(*)
GM PID Db: 1r01a(ok)
DTC Db: 1r01a(*)
VIN Db: 1r01c(ok)
info Db: 1r01b(*)

Post by **mikel** » Fri Jul 11, 2014 11:40 am

load this file to the intune drive then after it updates run the updater and it will work.

vig · Post by **vig** » Fri Jul 11, 2014 12:21 pm

thanks mike!!!!

vig · Post by **vig** » Fri Jul 11, 2014 12:42 pm

just finished, worked like a charm!! Thanks for responding so quickly mike!!

typhoon186 · Post by **typhoon186** » Mon Jul 14, 2014 1:59 pm

I got that same message but later it updated OK even without loading that attached file.

spoke too soon. not working after update

typhoon186 · Post by **typhoon186** » Mon Jul 14, 2014 7:28 pm

Well not working. message says the current firmware 1r04b cannot be replaced by the firmware package within in tune 1r03y.itf.

If I try to tune I get a message of an unexpected failure and tries to write a failure report. I am unable to change any tune at this time.

Is 1r04b a later version than 1r03y? the updaters says I have the latest firmware.

if not, explain exactly how and where to copy the latest firmware.

when looking at my firmware under settings, I have for GM 1r02a

vig · Post by **vig** » Mon Jul 14, 2014 10:23 pm

typhoon, I don't want to give you false info, I don't know which one is newer. I would think the 1r03y is because thats what mike is giving as the latest, but 1r04b logically sounds like it would be newer. I would say call/email them directly in case they don't see your question in my thread. Good luck, i'm sure it will get fixed soon, diablosport is unbelievable like that, They seem to fix every problem in minutes....

Post by **mikel** » Tue Jul 15, 2014 10:08 am

1r03y will work perfectly fine for anyone using it, I am not sure why you cant get 1r04b to load but its not needed

waw129 · Post by **waw129** » Tue Jul 15, 2014 4:59 pm

Hello - this is my initial install using a Windows machine. I already have problems and I haven't even made it out to my truck yet. Like the fellow before me, I also got an error code that states "The current firmware 1r03x cannot be replaced by Group_Update4". When I hit continue it states "Failed to install Group_Update.itfg". What does that mean?

Also, how can I get a custom tune for a 2013 Ram 1500 5.7L Hemi?

Thanks for any help.

Post by **mikel** » Tue Jul 15, 2014 5:15 pm

run the updater again and it will work properly

typhoon186 · Post by **typhoon186** » Tue Jul 15, 2014 8:13 pm

I'm all good now. thanks, Jim

is this normal when updating?

is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?

Re: is this normal when updating?