1r13a + fan settings + MDS

[nescafe4all]

something really weird i discovered after updating my trinity. compared to the previous update

- there is a 43 degrees gap between the tune and the setting, i.e. i set it on 172 F in order to kicks on 215 F
- nothing totally changes once i put the shifter in D or R ( exactly the same factore tune that HS fan kicks on 224 F ) for high speed fan


I do apologize to the people who contribute with my last thread for MDS but sorry guys i was away for couple of weeks and i've just came back

YES THE MDS WON'T SHUT OFF

P.S. it is 2013 dodge charger R/T with road and track package


this is the last tune written ( i reseted fan settings )

[mikel]

MDS is off here.

[nescafe4all]

thanks Mikel

i installed the tune initally without any modification on the parameters, and MDS still works

until i turn it off and YET IT STOPS WORKING finally

and i discovered that the engine revs on 6k RPM in P and N ( which is cool and i love it )


in relation to other parameters i still face the 43 degrees gap in fan settings also nothing changes in R and D ( still factory setting on 224 F degrees )

also i set the DRIVE rev limited on 6K RPM but it is actually 5800 !!

here is the last tune written

[nescafe4all]

Hello !

[mikel]

Im not sure I understand what you are asking sir?

[nescafe4all]

Fan setting do not work on R and D position in the shifter

Just on P and R !!!!

One i change the shifter the fans turn off immediately

[mikel]

thats something we are looking into.

the changes you apply take effect based on vehicle speed, they dont do anything while its sitting still in reverse or drive.

Thanks

[nescafe4all]

I tried to be over 8 MPH many times but it didn't work at all

It looks like nothing's been done ,, fans work at 224 F as stock ,,

[mikel]

please try this tune and let me know if the fans come on sooner.

[nescafe4all]

What figures should i put in fans parameters???

Ans does my car have MS fan ?? Or just 2 speeds: high and low ?

[mikel]

just load the tune, please dont make any changes.