2014 Cruze bogging down

Jgillette72 · Post by **Jgillette72** » Thu Apr 30, 2015 11:49 am

i loaded the 91 octane program for my Cruze 1.4T now it bogs in between gear shifts. any ideas?

Post by **mikel** » Thu Apr 30, 2015 11:50 am

close up the plug gap a bit...

Jgillette72 · Post by **Jgillette72** » Thu Apr 30, 2015 11:52 am

not to sound stupid, but how much is a "bit"?

Post by **mikel** » Thu Apr 30, 2015 12:18 pm

Im not sure what they are at stock, but ideally you want to be at about .030

Thans

Jgillette72 · Post by **Jgillette72** » Fri May 01, 2015 5:56 pm

files you requested

Jgillette72 · Post by **Jgillette72** » Fri May 01, 2015 5:57 pm

sorry, can you get previous attached files to Michael Litsch?

Jgillette72 · Post by **Jgillette72** » Mon May 04, 2015 6:36 am

checked gap, they are set .028. i reloaded factory tune. worried about hurting engine now.

Post by **Zach** » Mon May 04, 2015 8:27 am

How many miles are on the plugs? Just wondering the condition of them. If they are in good shape, could you gap them to .024-.025?

Also, the log isn't showing me Manifold Pressure, could you please add that to the log list. You'll go to Datalogging>Configure>PID select> to add it to the list.

What octane fuel are you running?

Jgillette72 · Post by **Jgillette72** » Tue May 05, 2015 9:57 am

the car has 6000 miles. i'll regap to .025 and add manifold pressure to log, i'm running 93 octane.

Jgillette72 · Post by **Jgillette72** » Tue May 05, 2015 11:49 am

I've decided to return InTune and go with something else. thanks.

Post by **mikel** » Tue May 05, 2015 12:05 pm

Best of luck with your next choice.

2014 Cruze bogging down

2014 Cruze bogging down

Re: 2014 Cruze bogging down

Re: 2014 Cruze bogging down

Re: 2014 Cruze bogging down

Re: 2014 Cruze bogging down

Re: 2014 Cruze bogging down

Re: 2014 Cruze bogging down

Re: 2014 Cruze bogging down

Re: 2014 Cruze bogging down

Re: 2014 Cruze bogging down

Re: 2014 Cruze bogging down