Downstream o2 question 03 PT GT

Post questions/issues related to your inTune-DCX application here.
Post Reply
SPLNeon
Posts: 33
Joined: Sun Sep 28, 2014 5:59 am

Downstream o2 question 03 PT GT

Post by SPLNeon »

Does the Diablo Tune disable the Downstream o2? Just changing out the Downpipe and wondered if I even bother plugging the Downstream back in.
Thanks in advance.
SPLNeon
Posts: 33
Joined: Sun Sep 28, 2014 5:59 am

Re: Downstream o2 question 03 PT GT

Post by SPLNeon »

I have installed a catless 3" Downpipe that dumps under the car. No Exhaust. The Wideband o2 is about 12" from the exit. It reads 16.3 afr at Idle and 12.3 afr WOT. Would the catless DP Lean it out that much? Or do you think the sensor is too close to the Dump? Should I add a Little fuel accross the rpm range for WOT?
Injectors are Caliber SRT4 Injectors. The Downstream o2 is Plugged in, But Just tied up under the car, Not installed (this is a track only car)
SPLNeon
Posts: 33
Joined: Sun Sep 28, 2014 5:59 am

Re: Downstream o2 question 03 PT GT

Post by SPLNeon »

So does the Intune Based "Diablotune" disable the downstream o2?
And I realize that the tune is built for a stock vehicle, so in turn, do you recommend adding fuel when deleting the Cat and just dumping at the downpipe?
User avatar
mikel
Posts: 58715
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Downstream o2 question 03 PT GT

Post by mikel »

No, a custom tune is required to disable any codes.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
SPLNeon
Posts: 33
Joined: Sun Sep 28, 2014 5:59 am

Re: Downstream o2 question 03 PT GT

Post by SPLNeon »

Cool, thanks for the Answer! :-)
Post Reply

Return to “inTune DCX (i-1000-DCX)”