2.7 ecoboost calibration error

Post by **sohfast94** » Fri Jun 19, 2015 4:26 pm

Here is the ITF

ozzcrash · Post by **ozzcrash** » Fri Jun 19, 2015 4:44 pm

it is telling me I need to register before I can update

Post by **sohfast94** » Fri Jun 19, 2015 4:45 pm

Just drop that on the intune drive and it'll suck it up and load it.

Post by **mikel** » Fri Jun 19, 2015 4:48 pm

load this to the intune drive and it will register then you can update.

ozzcrash · Post by **ozzcrash** » Fri Jun 19, 2015 5:44 pm

got the files on, updated until all I get is error messages again. going to try it

ozzcrash · Post by **ozzcrash** » Fri Jun 19, 2015 5:50 pm

Same issue.

Post by **mikel** » Mon Jun 22, 2015 10:03 am

ozzcrash wrote:Same issue.

you havent loaded the file he posted, please load the ford tunes 1t01zc.itf file to the intune drive and let the tool import it.

then when it reboots, go to settings/advanced/clear all updates, then plug it into the truck and it will ask for update, then it will work on the PC.

ozzcrash · Post by **ozzcrash** » Mon Jun 22, 2015 8:58 pm

I've installed the file to the intune, tried it in truck, (PCM may need update error) came back in and updated (autoupdate isn't working (Calibration error) so I manually check for updates and it installs a update). Tried in truck again, same PCM error. I deleted the previous info as you suggested. Ive watched it prepare, write, verify and reboot. Ive tried every combination I can think of.
Right now the only file/update installed is the file you posted. On the intune under firmware info is Ford Tune Db: 1t01zc Ford PID Db 1r01b. Ill post the info again...

Post by **mikel** » Tue Jun 23, 2015 10:07 am

ozzcrash wrote:I've installed the file to the intune, tried it in truck, (PCM may need update error) came back in and updated (autoupdate isn't working (Calibration error) so I manually check for updates and it installs a update). Tried in truck again, same PCM error. I deleted the previous info as you suggested. Ive watched it prepare, write, verify and reboot. Ive tried every combination I can think of.
Right now the only file/update installed is the file you posted. On the intune under firmware info is Ford Tune Db: 1t01zc Ford PID Db 1r01b. Ill post the info again...

its not looking for an update here, please go to the truck and if it asks to check fro an update click the green check then post a new info file.

ozzcrash · Post by **ozzcrash** » Tue Jun 23, 2015 6:05 pm

Plugged it into truck, it said PCM thing and I clicked checkmark. Here's the info again.

ozzcrash · Post by **ozzcrash** » Tue Jun 23, 2015 6:42 pm

Proceeded to update on PC, manually checked and it installed update, heres info

ozzcrash · Post by **ozzcrash** » Tue Jun 23, 2015 6:49 pm

Went back to truck, asked for PCM calibration again. Heres the info

ozzcrash · Post by **ozzcrash** » Tue Jun 23, 2015 6:51 pm

Updater wont let me automatically or manually update anymore. Hope we can figure this out.

Post by **mikel** » Wed Jun 24, 2015 10:09 am

were on it.

ozzcrash · Post by **ozzcrash** » Mon Jul 06, 2015 10:10 pm

Just checking in.

2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error

Re: 2.7 ecoboost calibration error