Metco 2.60 pulley

dmdcutter · Post by **dmdcutter** » Mon Jul 06, 2015 2:43 pm

After putting on my steeda pulley, a client of mine just got rid of his Shelby and gave me his 2.60 metco pulley...can you post a tune for 2.6 for the predator since there is only 2.7 on the device? To be thorough, I mean the pulley with a 123mm MAF CAI.

Thanks.

Post by **DiabloMatt** » Mon Jul 06, 2015 3:42 pm

can you post the tune that is in the car currently please?

dmdcutter · Post by **dmdcutter** » Wed Jul 08, 2015 2:09 pm

Sorry for the delay...I couldn't find the usb/serial connector for my predator. Thank you for the 2.6 tune. I look forward to putting in the metco pulley.

Post by **DiabloMatt** » Wed Jul 08, 2015 2:13 pm

ok and to be clear... the tune you posted is the tune that is in the car currently and all is well. you are JUST swapping the pulley? and what pulley is the 2.6 replacing?

and is this on 93 octane?

dmdcutter · Post by **dmdcutter** » Wed Jul 08, 2015 2:18 pm

this is replacing the steeda 2.65. Haven't had a problem yet. Yes, I always run 93. Thanks

Post by **DiabloMatt** » Wed Jul 08, 2015 2:41 pm

Here you go....

you more than likely would have been fine on the old tune. but i pulled a deg of timing and added a touch of fuel just to be sure. better safe than sorry

dmdcutter · Post by **dmdcutter** » Wed Jul 08, 2015 2:46 pm

You are fucking awesome!!!!! Thank you. Now I just have to wait for the aux pulley and a free Sat or Sun. morning. Thanks again!

Post by **DiabloMatt** » Wed Jul 08, 2015 2:47 pm

and a whipple....

perhaps some twin turbos

dmdcutter · Post by **dmdcutter** » Wed Jul 08, 2015 2:51 pm

Sounds like a Christmas list.

Metco 2.60 pulley

Metco 2.60 pulley

Re: Metco 2.60 pulley

Re: Metco 2.60 pulley

Re: Metco 2.60 pulley

Re: Metco 2.60 pulley

Re: Metco 2.60 pulley

Re: Metco 2.60 pulley

Re: Metco 2.60 pulley

Re: Metco 2.60 pulley