2015 Mustang GT/PP/6spd

Post questions or any issues with your inTune here.
Post Reply
sldghmr
Posts: 9
Joined: Sat Sep 05, 2015 3:13 am

2015 Mustang GT/PP/6spd

Post by sldghmr »

Hi. I am using my inTune for the first time. My car is modified with a Steeda CAI and long tube headers. I'm doing all 3 for the first time...probably should have said that! I didn't see a forum post with specifics of how to get tuning help. Will the 93Oct/CAI tune be safe enough to run with LTHs? The Steeda CAI has a restrictor that I can put in place (so it could be run on stock tune). Trying to figure out a safe starting point...CAI w/restrictor & 93Oct/CAI tune??? Thanks!
sldghmr
Posts: 9
Joined: Sat Sep 05, 2015 3:13 am

Re: 2015 Mustang GT/PP/6spd

Post by sldghmr »

PCM_FPGM05K_LastTuneWritten.frg
(141.16 KiB) Downloaded 147 times
Ok....I did the 93Oct tune (w/out CAI) because I put the restrictor in place. Started and ran fine, no check engine light. Loaded the tune, ran fine for a while then kicked 2 codes (P2004 & P2011). I'm attaching the tune written and a datalog of idling and driving around (less than 3K rpm)...thanks for any help you can give....
Attachments
1FA6P8CF7F5348013_00.log
(1.6 MiB) Downloaded 140 times
DiabloMatt
Posts: 738
Joined: Thu Jul 02, 2015 11:19 am

Re: 2015 Mustang GT/PP/6spd

Post by DiabloMatt »

weird.... let me look and see
sldghmr
Posts: 9
Joined: Sat Sep 05, 2015 3:13 am

Re: 2015 Mustang GT/PP/6spd

Post by sldghmr »

Thank you
sldghmr
Posts: 9
Joined: Sat Sep 05, 2015 3:13 am

Re: 2015 Mustang GT/PP/6spd

Post by sldghmr »

Got to looking around...talked to another guy w/simular setup.... ran the 93Oct/CAI tune w/+2 WOT fuel. Car felt better (less surge) and no CEL's (so far). Last written tune & datalog attached.
Attachments
1FA6P8CF7F5348013_02.log
93Oct/CAI +2 WOT fuel 2K-4K&4K-7K
(1.63 MiB) Downloaded 133 times
PCM_FPGM05K_LastTuneWritten.frg
93Oct/CAI +2 WOT fuel 2K-4K&4K-7K
(141.21 KiB) Downloaded 157 times
Post Reply

Return to “General inTune forum”