Hello need some help pls !

99SSragtop · Post by **99SSragtop** » Sat Dec 12, 2015 3:16 pm

Hello everyone. Not new to Diablo but new to Intune and my 2009 G8 GT 6.0L Auto.
I bought an Intune from my friend who has the same car as mine and before he gave it to me he returned his Intune or car to stock. My vin is showing up on the nItune presently.
Build date is Feb 2015.
Do I need to update the Intune ?
I have a few questions.
But to cut to the chase I installed the Diablo tune and installed the hard shift, eliminated DOD, placed torque management " On" and firmed up shifts 1-2 and 2-3 to full.
Now I took the car for a spin and the shifts virtually feel like stock no real firmness to it.
The programmer went through all its process and the cars bells dinged and donged ( lol ) with the key on of course and it finally came to " you may unplug the Intune and start your car "
I did notice when I checked the Intune for my vin I noticed that before I started tuning that in that section it had some 9222 numbers in the tcm and ecm section. If there has been no tune written why are those numbers there should it not be blank ?
Should I do any resets on the Intune ?
Thanks

99SSragtop · Post by **99SSragtop** » Wed Dec 16, 2015 10:12 pm

Anyone ?

Post by **mikel** » Thu Dec 17, 2015 11:10 am

post the files from the tunes folder here and we'll check them out.

99SSragtop · Post by **99SSragtop** » Tue Dec 22, 2015 1:09 pm

Thanks

99SSragtop · Post by **99SSragtop** » Thu Dec 24, 2015 11:58 am

F150_parking_lot.log: (569.96 KiB) Downloaded 328 times

Why the heck do i have an f150 log in my Intune ?

99SSragtop · Post by **99SSragtop** » Thu Dec 24, 2015 12:09 pm

how do I get rid of these data logs from my Intune ?

99SSragtop · Post by **99SSragtop** » Fri Dec 25, 2015 3:22 pm

Here ya go I hope.
Also under firmware GM Tune Db is 1r02l (ok) is this the latest ?
Thanks

99SSragtop · Post by **99SSragtop** » Sat Dec 26, 2015 3:23 pm

Here is files after updating Intune.
Also not sure how to get the correct date on intune ?
Thanks

99SSragtop · Post by **99SSragtop** » Wed Dec 30, 2015 1:28 pm

Has intune changed any tcm parameters ?
Thanks

99SSragtop · Post by **99SSragtop** » Mon Jan 04, 2016 10:52 pm

99SSragtop · Post by **99SSragtop** » Mon Jan 18, 2016 1:44 pm

Any thoughts Mike

Post by **mikel** » Mon Jan 18, 2016 1:46 pm

that F150 log is in the logs folder on your PC, not your intune.

what vehicle are we discussing here again?

99SSragtop · Post by **99SSragtop** » Mon Jan 18, 2016 9:12 pm

09 pontiac g8 gt

why would a ford f150 be in there ?

Post by **06MonteSS** » Tue Jan 19, 2016 9:52 am

it's not in the programmer..

that f150 log is a DEMO log that gets installed with the DataViewer software.. when you install the DataViewer software, it also copies a few data logs to your computer, so you have demo logs to look at with the dataviewer software.. I believe theres a c6 vette log too..

those have nothing to do with the programmer.. those are demo logs from the DataViewer on your PC, not the tool..

don't worry about 'em.. or just delete them from your PC if they confuse you.

99SSragtop · Post by **99SSragtop** » Fri Jan 22, 2016 9:37 pm

Have any good tunes for a G8 you can pass my way for a long time Diablo user.

Hello need some help pls !

Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !

Re: Hello need some help pls !