Not working

72d100 · Post by **72d100** » Wed Feb 10, 2016 8:09 pm

still waiting on a update

tyggz · Post by **tyggz** » Thu Feb 11, 2016 12:00 am

Mike - could you please make my file manually as well?
Thanks!

info.xml

tdk439 · Post by **tdk439** » Thu Feb 11, 2016 10:03 am

As with everyone else, mine is saying the same thing. Here is the info file

Post by **mikel** » Thu Feb 11, 2016 11:17 am

tyggz wrote:Mike - could you please make my file manually as well?
Thanks!

info.xml

this one is not requesting an update, take it to the vehicle and make sure it asks to check for an update and click ok.

Post by **mikel** » Thu Feb 11, 2016 11:19 am

tdk439 wrote:As with everyone else, mine is saying the same thing. Here is the info file

save this to the i2 drive and let the device import it then you may load it to the vehicle then load the tunes.

Thanks

tdk439 · Post by **tdk439** » Thu Feb 11, 2016 12:47 pm

So I added the file you stated. Then I went to my car (2006 Dodge Charger RT) and it updated the calibration but then it still said my car is not supported.

Post by **mikel** » Thu Feb 11, 2016 1:20 pm

tdk439 wrote:So I added the file you stated. Then I went to my car (2006 Dodge Charger RT) and it updated the calibration but then it still said my car is not supported.

post the current info.xml file.

Thanks

tdk439 · Post by **tdk439** » Thu Feb 11, 2016 2:44 pm

Here ya go

bojack201 · Post by **bojack201** » Thu Feb 11, 2016 3:17 pm

mikel wrote:
bojack201 wrote:
mikel wrote:if you will attach the file I am requesting I may be able to make the file for you and circumvent the server.

Thakns
figured it out
here is your file

Thank you greatly for being patient and helping me Mike, do I just move the file to the E drive and replace the current info file?

Post by **mikel** » Thu Feb 11, 2016 3:39 pm

yes, just copy it to the root of the i2 drive.

tdk439 · Post by **tdk439** » Thu Feb 11, 2016 5:20 pm

I got the tuner to work. I chose 93 octane (car was filled with 93), change tire size, and remove speed limitor. I test drove it and right before I got back to my home I lost the transmission and had a PCM code. In fact the tune caused several: PCM:P0700, PCM: U0100, PCM: U0103, PCM: U0121, and PCM: P0219. I didn't like test driving and the transmission going out. I had to clear the code to drive again.

bojack201 · Post by **bojack201** » Thu Feb 11, 2016 5:24 pm

I believe I am going to be waiting until all this gets fixed for sure before I try to use it...don't wanna mess up my truck I just got it and plan on keeping it for many years to come. Wish I could use a $450 product out of the box with no problems though.

tdk439 · Post by **tdk439** » Thu Feb 11, 2016 5:26 pm

bojack201 wrote:I believe I am going to be waiting until all this gets fixed for sure before I try to use it...don't wanna mess up my truck I just got it and plan on keeping it for many years to come. Wish I could use a $450 product out of the box with no problems though.

Yeah. I agree!

72d100 · Post by **72d100** » Thu Feb 11, 2016 7:48 pm

The file they sent me works. I'm kind of afraid to leave the car tuned with the issues everyone is having though

bojack201 · Post by **bojack201** » Thu Feb 11, 2016 8:04 pm

72d100 wrote:The file they sent me works. I'm kind of afraid to leave the car tuned with the issues everyone is having though

When I add this file to the drive my tuner says "A calibration update has been detected for an unknown vehicle. Please contact DiabloSport for further information."

Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working

Re: Not working