2015 Dodge Charger R/T Road and Track Pack - 2 issues

[RoamPT]

Hey guys, just installed my PCM with the 91 octane canned tune, car pulls harder definitely, the issues are, I can't adjust the shifting firmness and the axle ratio. Every time i try i get this error:

[mikel]

please post the info.xml file from the i2 drive.

[RoamPT]

Here its is.

[RoamPT]

Did you figure out the problem Mike?

[mikel]

No, we are still investigating.

[RoamPT]

Ok good because i got a custom tune and i would like to adjust my axle ratio to my custom tune so i can get more out of it.

[RoamPT]

I dont mean to pressure, but is this figured out at all? Its a bit annoying having a tune and not having the right axle ratio the shifting firmness. Its almost useless having the tune without being able to adjust some of the key factors.

[mikel]

sorry, with the 8 speed there is no shift firmness option, it should not be there.
The axle ratio does not need to be adjusted for 8 speeds either.

Thanks

[RoamPT]

sorry, with the 8 speed there is no shift firmness option, it should not be there.
The axle ratio does not need to be adjusted for 8 speeds either.

Thanks

Well the thing is, the 2015 Dodge Charger R/T comes with the 2.65 gears, the 2015 Dodge Charger R/T with the Super Track Pak has the 3.07 gears which is the one i have. I have to be sure the PCM and tune is corrected to the 3.07 gears.

[mikel]

it knows what your stock gears are, there is no need to tell it....

[RoamPT]

it knows what your stock gears are, there is no need to tell it....

Fair enough. Are you guys planing to unlock the shifting firmness on the 8 speed transmissions?