Intune TM settings 2007 nnbs 5.3 l 4L60E

[uswkem51]

I am wanting to reduce the TM on my truck by about 50%. My truck has the 4L60E.

I know on the 6-speeds it's either ON or OFF. With the 4-speed, is there a percentage when within the programmer or is it a series of negative and positive numbers. What do I need to set it at to reduce TM by about half? Right now I just have AFM turned off and want to reduce TM a little. What kind of effect will that have on the drivability? I don't run the truck hard either but would like a little more responsiveness.

For the canned 87-Octane tune, what parameters are adjusted? Is TM fully removed, 50%, 75%, etc?

For my truck (2007 Silverado 5.3L w/ 4L60E) is there TM on both the motor and transmission or just the transmission?

[Mossyoakglock]

Bumping this one.

I am want to know this same thing for my '08 Silverado w/ 4L60E.

[mikel]

tm on the engine is removed, tm on the tcm is only left on for upshift abuse mode, as turning that off iften leads to sloppy shift feel on the trucks.

Thanks

[Mossyoakglock]

What about if wanting to run the modified stock tune and just reduce TM?

What setting should we put on the intune if we want to remove roughly 50% of the TM? Right now I have just AFM turned off with Modified Stock Tune. I also want to reduce TM by about 50%. What setting does it need to be at?