2010 Ford Ranger 2.3 Spark knock retard

[Pony Boy]

Am I missing something on my intune, or is there no PID in the datalog for seeing how much timing is being pulled? All I see for timing is the spark advance for number 1 cylinder and overall timing advance. It seems there is no way for me to tell if timing is being retarded at all.

[06MonteSS]

under the Misfire section, there should be a knock retard parameter you can add to the logging pid's...

[Pony Boy]

I'm just now getting back to this. Under the misfire section i only have two options, high byte-cumulative number of misfires, and low word of cumulative misfires. I don't see anything for spark knock or for timing being pulled.

[Pony Boy]

Anyone else run into this or am I just blind? I don't find any parameters for spark knock or timing being pulled. I can't advance the timing of I can't tell if it's being pulled...

[mikel]

there should be one there, can you try connecting a laptop and streaming it through DV?

Thanks

[Pony Boy]

That's where I've looked for it, connected to dataviewer.