Black Screen

houseofpower · Post by **houseofpower** » Tue Mar 11, 2008 7:06 pm

Predator worked fine with 8r18. I wrote a custom tune and had to do the Crom update to 9r20. Now the screen is black on the predator....

Mike_Levy · Post by **Mike_Levy** » Tue Mar 11, 2008 8:24 pm

Try the contrast screw on the back.

houseofpower · Post by **houseofpower** » Tue Mar 11, 2008 8:25 pm

I tried that at first, no go.

johnc · Post by **johnc** » Wed Mar 12, 2008 8:41 am

Someone will look into this this morning. What is the Predator part number?

alejandro · Post by **alejandro** » Wed Mar 12, 2008 9:01 am

can you try putting 8r18 back into the unit, I understand you stated that it worked fine on 8r18 but if in bad luck unit can have gone back during the update (unlikely, but posible), just to rule out hardware.

alejandro · Post by **alejandro** » Wed Mar 12, 2008 9:37 am

in previous message I ment "gone bad" not "gone back"

houseofpower · Post by **houseofpower** » Wed Mar 12, 2008 1:14 pm

johnc wrote:Someone will look into this this morning. What is the Predator part number?

Part number is #181712

houseofpower · Post by **houseofpower** » Wed Mar 12, 2008 1:26 pm

alejandro wrote:can you try putting 8r18 back into the unit, I understand you stated that it worked fine on 8r18 but if in bad luck unit can have gone back during the update (unlikely, but posible), just to rule out hardware.

Allready tried forcing the 8r18 back into it, disabling autodetect, express tune and locating crom. Power toggle and it hangs there.

Post by **mikel** » Wed Mar 12, 2008 1:28 pm

Does the DSDL not autodetect the tool now?
As if there is no main menu being displayed?

houseofpower · Post by **houseofpower** » Wed Mar 12, 2008 1:39 pm

No. That's why I tried the option to go with disabling auto detect. It comes up on the front page ofthe dsdl.

Post by **mikel** » Wed Mar 12, 2008 1:42 pm

OK, lets RMA this so we can see what happened here.

Thanks

Black Screen

Black Screen

RE: Black Screen